Stylish, non-sparking vintage spark plug connector for your vintage moped, moped and small motorcycle.
Since the spark plug connector has an M4 mounting thread, the end cap on the spark plug must be removed. The brass attachment is then screwed onto the spark plug in place of the plug cap. The ignition cable can then be plugged into the cap using a metal clamp.
Fits up to max. 7 mm ignition cable.
Caution: The spark plug connector is not insulated and must not be touched during operation.
When using an electronic ignition system (HPI, PVL, Selettra etc.), a softened spark plug cap should be used.
You can find matching spark plugs, spark plug cables and alternative spark plug connectors in the accessories section.
Details
Material | Brass |
Color | goldbronze |
Spark plug socket | M4 |
Cable available | No |
Suppressed | No |
Ø cable | 7 mm |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
Moped fans like you also bought:
GPO piston 40.96 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 2.5 mm · Total piston height (E): 52 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Weight: 90 g
EUR 38,20