Special saddle in a low design and deep sissy bar for your moped, moped and small motorcycle.
Chopper seat with Puch print. The moped seat is not sprung. The saddle holder is in the front part, so the seat slides far back.
The raised upholstery and the attached backrest ensure a very comfortable seat.
Width: 25 cm
Length: 30 cm
Height (upholstery): approx. 6 cm
Total height of upholstery: 18 cm
Total height with backrest: 28 cm
Figure 5 serves only to illustrate the assembled saddle.
Alternative saddles and other attachments can be found in the accessories section.
A quality product made in Portugal.
Details
Manufacturer | Made in Portugal |
Color | black |
Lettering | Yes |
Total length | 300 mm |
Width | 250 mm |
Height | 280 mm |
Suitable for the following models
Puch |
Accessories & related products
Denfeld saddle black NOS
Manufacturer: Denfeld · Ø Saddle tube holder: 22 mm · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Spring-loaded: Yes · Lettering: No · Total length: 280 mm · Width: 280 mm · Height: 20 mm · Height: 120 mm · Material thickness: 2 mm · Material thickness: 4 mm · Number of fixing points: 1 pcs
EUR 346,30
Saddle suspension low version black
Manufacturer: Made in Portugal · Ø Saddle tube holder: 22 mm · Material: Imitation leather · Material: Steel · Surface: powder-coated · Color: black · Spring-loaded: Yes · Lettering: No · Number of fixing points: 1 pcs · Total length: 300 mm · Width: 90 mm · Width: 245 mm · Height: 165 mm
EUR 57,60
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Total length: 55 mm · Total length: 75 mm · Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 11,40
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 82 · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Standard · Area of application: Tuning
EUR 153,50
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm · Total length: 83 mm · Area of application: Special tool
EUR 11,00
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Material lever: Plastic · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 100 mm · Mounting type: Union nut
EUR 13,50