Full cheek crankshaft with reinforced connecting rod suitable for manual Puch X30 Velux mopeds with Z50 engines (not suitable for Puch X30 Sport NS / NL mopeds).
High-quality and precisely fitting racing crankshaft, which has proven itself in various load tests up to 19,000 rpm.
All balancing holes in the cheeks have been sealed with aluminum inserts for maximum pre-compression.
Dimensions of the crankshaft:
Note: The fit for the clutch hub is very precise. You may need to apply a little pressure to insert the hub. The clutch hub with item number 32380 is not compatible with this crankshaft.
Quality product from the Portuguese manufacturer Rito.
Details
Manufacturer | Rito |
Weight | 943 g |
Material | Steel, Aluminum |
Area of application | High End |
Cheek type | Full cheeks |
Crankshaft stroke | 43 mm |
Connecting rod length center-center | 90 mm |
Thread type | MF10x1 (fine pitch thread) |
Total length of crankpin on clutch side | 58 mm |
Total length crankpin ignition side | 67.5 mm |
Ø crank webs | 69.8 mm |
Ø Connecting rod eye | 15 mm |
Thread length | 9 mm, 12 mm |
Ø piston pin (B) | 12 mm |
Ø Bearing seat (clutch side) | 17 mm |
Ø Bearing seat (ignition side) | 17 mm |
Dimension needle bearing | 12 / 15 x 14.7 mm (axe 12) |
Wide crank webs | 34.3 mm |
Length 1st paragraph | 19.4 mm |
Length 2nd paragraph | 19 mm |
Ø 1st step (on the coupling side) | 17 mm |
Ø 2nd shoulder (on the clutch side) | 15 mm |
Length of shoulder (ignition side) | 18 mm |
Number of gears | 2 pcs |
Suitable for the following models
Puch | Z50 (X30 Velux) 2-Gang MS, MV, MV50 |
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Diameter: 24 mm · Diameter: 40.3 mm · Total length: 120 mm · Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: blue galvanized · Number of components: 1 pcs · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 49,50
swiing® revival shim set crankshaft L17 | Puch Z50
Manufacturer: swiing® revival parts · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Nominal diameter: 17 mm · Ø outside: 23.8 mm
EUR 10,00
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,20
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch spare part no.: 349.3.22.030.0 · Puch spare part no.: 349.4.22.030.0
EUR 11,20
swiing® revival shim set crankshaft L17 | Puch Z50
Manufacturer: swiing® revival parts · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Nominal diameter: 17 mm · Ø outside: 23.8 mm
EUR 10,00