Exciter coil for the breaker cable of your Piaggio Ciao, Si, Bravo, Boxer moped / moped.
Ø Mounting hole: 4.4 mm
Hole spacing: 50 mm
This pulse coil does not have a lug for screwing onto the breaker, as is usually the case, but a plug with a small 1. 5 mm hole.5 mm hole.
This hole must either be drilled out or the plug cut off and a lug attached.
You will find the high-quality pendant from GPO along with other parts in the accessories section.
Details
Ø mounting hole | 4.4 mm |
Mounting type | Screws |
Hole spacing | 50 mm |
Number of fixing points | 2 pcs |
Area of application | Standard, Original |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: blue galvanized · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Diameter: 12 mm · Diameter: 24 mm · Total length: 100 mm · Number of components: 2 pcs
EUR 20,20
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: No · Ø axle: 5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 5 mm · Piaggio spare part no.: 103133
EUR 11,20
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Original · Area of application: Standard · Capacity: 0.28 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Height: 26 mm · Piaggio spare part no.: 102939
EUR 13,40
Flywheel puller | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 19 mm · Width across flats Screw: 18 mm · Manufacturer: Quenching · Pull-off depth inside: 68 mm · Material: Steel · Surface: burnished · Surface: galvanized · Diameter: 12.9 mm · Thread type: MF17x1 (fine pitch thread) · Number of components: 2 pcs · Total length: 36.5 mm · Area of application: (Dis)assembly tool
EUR 13,40
GPO Pulse coil | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Tension: 6 V · Ø mounting hole: 4.6 mm · Ø Internal flywheel: 91 mm · Hole spacing: 50 mm · Mounting type: Screws · Width: 23.8 mm · Total length: 80 mm · Height: 23.8 mm · Area of application: Standard · Number of fixing points: 2 pcs
EUR 27,80
Moped fans like you also bought:
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Height: 26 mm · Manufacturer: EFFE · Ø outside: 18 mm · Area of application: Original · Area of application: Standard · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Piaggio spare part no.: 102939
EUR 13,40
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: No · Ø axle: 5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 5 mm · Piaggio spare part no.: 103133
EUR 11,20
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Original · Area of application: Standard · Capacity: 0.28 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Height: 26 mm · Piaggio spare part no.: 102939
EUR 13,40