Single piston ring suitable for the 47 mm racing kit for Fantic Issimo & Yamaha Yamy mopeds with a Minarelli V1 engine.
Two pieces are required per piston.
You can find the matching cylinder kit in the accessories section.
Width of piston ring: 1.5 mm
Quality product from the Italian manufacturer Polini.
Details
| Manufacturer | Polini |
| Area of application | Racing |
| Nominal diameter | 47 mm |
| Height | 1.5 mm |
Suitable for the following models
| Fantic | Issimo |
| Yamaha |
Accessories & related products
Polini 47 mm cylinder kit | Minarelli V1
Manufacturer: Polini · Area of application: Tuning · Material: Gray cast iron · Surface: varnished · Displacement: 75 ccm · Camouflaged: No · Nominal diameter: 47 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 18.3 mm · Ø outlet inside: 20.5 mm · Hole spacing inlet: 38.5 mm · Ø piston pin (B): 12 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 46 x 46 · Decompressor: none · Hole spacing outlet: 38 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread)
EUR 236,60
MLM 18 mm intake manifold Dell'Orto PHBG | Minarelli V1
Ø inside: 18 mm · Manufacturer: MLM · Area of application: Tuning · Material: Steel · Color: black · Surface: varnished · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 40 mm · Mounting type: Screws
EUR 78,80
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Area of application: Standard · Surface: blue galvanized · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2,70
Plastic license plate holder
Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Width: 108 mm · Height: 11 mm · Number of fixing points: 9 pcs · Ø mounting hole: 6 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Thread type: M5x0.8 (standard thread) · Total length: 175 mm · Thread length: 6 mm
EUR 7,80
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
Dell'Orto 21 mm PHBG CS carburetor hand choke
Total length: 82 mm · Width: 72 mm · Height: 125 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Color: black · Carburetor type: PHBG AS · Nominal diameter: 21 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5 · Nozzle block: 262AU · Nozzle size: 92 · Size of secondary nozzle: 50
EUR 135,10
Meteor piston 38.6 mm oversize | Sachs 50/2 & 503
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 38.55 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Weight: 84 g · Pony spare part no.: A2774 · Pony spare part no.: A4359 · Sachs spare part no.: 0286 377 012 · Sachs spare part no.: 0286 378 006
EUR 56,20
Collection only possible with online purchase and appointment.
