Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify carburetor tuning and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 66
Side nozzle size: 42
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
Details
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Total length | 73.5 mm |
| Nominal diameter | 19 mm |
| Ø Internal connection | 24 mm |
| Nozzle size | 66 |
| Ø without reducing sleeve | 26 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 46 mm |
| Area of application | Tuning, Racing, Performance, High End |
| Ø fuel hose connection | 7 mm, 6 mm |
| Width | 66 mm |
| Mixed oil connection | Yes |
| Height | 135 mm |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Camouflaged | No |
| Size of secondary nozzle | 42 |
| Mounting type | Plug connection clamped |
Accessories & related products
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Manufacturer: Polini · Material: Aluminum · Material: Plastic · Surface: glass bead blasted · Ø outside: 24 mm · Number of flaps: 4 pcs · Ø inside: 28.6 mm · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Mounting type: Screws · Area of application: Racing · Area of application: Tuning · Thread type: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø mounting hole: 5.2 mm · Camouflaged: No
EUR 163,60
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm
EUR 3,30
Airsal intake manifold 46 / 47 mm cylinder | Puch
Manufacturer: Airsal · Material: Aluminum · Ø inside: 19 mm · Mounting type: Screws · Area of application: Tuning · Total length: 60 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 65 mm · Ø External connection: 24 mm · Camouflaged: No · Total height: 75 mm
EUR 46,60
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 54 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Drive: External hexagon
EUR 46,60
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Drive: External hexagon
EUR 46,60
Polini 43.5 mm cylinder kit reed valve with head (version 2.0) | Puch
Manufacturer: Polini · Material: Aluminum · Surface: nikasil-coated · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Nominal diameter: 43.5 mm · Ø outlet inside: 22 mm · Area of application: Racing · Area of application: Tuning · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Camouflaged: No
EUR 466,40
Collection only possible with online purchase and appointment.
