41.0 mm replacement piston with a 2 mm L-shaped piston ring with internal circlip (IS) and a 1.5 mm rectangular piston ring with flank circlip (FS) for the blown 41 mm cylinder on your Puch X30 Velux moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. In addition, you can find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You can find the corresponding assembly tools, piston rings, piston pin locks etc. in the accessories section.
Details
| Ø outside piston (A) | 40.94 mm |
| Ø piston pin (B) | 10 mm |
| Compression height (C) | 23.25 mm |
| Curvature (D) | 3.65 mm |
| Total piston height (E) | 49.35 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 41 mm |
| Piston ring mold | L-ring, Rectangular ring |
| Piston ring impact | Internal fuse (IS), Flank safety device (FS) |
| Piston ring height | 2 mm, 1.5 mm |
| Weight | 85 g |
Suitable for the following models
| Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Area of application: (Dis)assembly tool · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Number of components: 7 pcs
EUR 22,40
GPO cylinder 41 mm fan-cooled 10 mm KoBo | Puch X30 Velux, N-2AH
Manufacturer: GPO · Manufacturer: Meteor Racing · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Hole spacing inlet: 32 mm · Nominal diameter: 41 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread)
EUR 123,90
Not in stock
Moped fans like you also bought:
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Tuning · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Number of components: 4 pcs · Decompressor: Yes · Hole spacing inlet: 38 mm
EUR 10,00
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 41 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing outlet: 32 mm · Number of components: 4 pcs
EUR 22,40
GPO cylinder 41 mm fan-cooled 10 mm KoBo | Puch X30 Velux, N-2AH
Manufacturer: GPO · Manufacturer: Meteor Racing · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Hole spacing inlet: 32 mm · Nominal diameter: 41 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread)
EUR 123,90
Not in stock
GPO Ø 41 mm "Sombrero" cylinder kit | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Gray cast iron · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 57 ccm · Ø cylinder neck: 44.7 mm · Camouflaged: No · Nominal diameter: 41 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 19 mm · Ø outlet inside: 25 mm · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread)
EUR 225,30
Collection only possible with online purchase and appointment.
