This paint set is a remix of the original copper paint used by Puch (original color number P6801T).
The copper-orange glaze corresponds 100% to the original color.
The set contains 400 ml silver base (reproduced using the original sample) and 400 ml copper-orange (glaze), the mixing ratio of the glaze is 1:1 and results in 0.8 l ready to spray.
The mixing ratio of the silver base is also 1:1.8 l ready to spray.
The mixing ratio for the silver primer is also 1:1.
It is essential to use two-coat thinner (BC thinner / basecoat thinner).
After the moped parts have been prepared as usual, they are painted with the silver primer to cover them. After a flash-off time of approx. 30 minutes, apply two or three even coats (depending on the thickness of the coat) of the copper orange glaze. As the amount of glaze applied can change the color tone, it is recommended to create a color sample in advance and then paint the moped using the same system!
Painting with 2-component clearcoat after another 30 minutes is mandatory. However, this is not included in the set.
The set includes the following fixed parts:
Details
Manufacturer | Puch |
Contents [ml] | 800 ml |
Color | copper-colored, orange |
Suitable for the following models
Puch |
Accessories & related products
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 3,15
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2,70
Tank sticker "PUCH maxi S" 204 x 29 mm | Puch Maxi S
Color: Chrome · Place of use: Tank (+ frame) · Color: black · Color: green · Color: white · Rear side texture: Adhesive · Width: 204 mm · Consistency: UV-resistant · Consistency: petrol resistant · Border: Chrome surround · Height: 29 mm · Puch spare part no.: 349.2.20.537.0
EUR 9,60
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,20