Shaft seal ring 15x30x9 mm for use on the crankshaft of your Sachs moped / moped with Sachs ADV, AB and AC engine.
This radial shaft seal ring (also known under the trademarked brand name Simmerring®) is mounted on the crankshaft on the end face.
Ø inner: 15 mm
Ø outer: 30 mm
Width: 9 mm
Material: NBR
Temperature resistant: -30 to +100 °C, briefly up to 120 °C
B DUO - With sheet metal outer casing and two sealing lips.
Original spare part number: A1832
Details
| Place of use | Crankshaft |
| Temperature resistance (min.) | -30 - 100 °C |
| Simmering type | B DUO - With sheet metal outer casing / two sealing lips. |
| Manufacturer | Sachs |
| Material | NBR |
| Width | 9 mm |
| Ø outside | 30 mm |
| Ø inside | 15 mm |
Suitable for the following models
| Sachs | 503 - AB, AC, ADV |
Accessories & related products
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Area of application: Standard · Hole spacing inlet: 32 mm · Hole pattern [mm]: 60 x 40
EUR 46,60
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Color: gray · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 23,30
EUR 332,86/l
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Color: red · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Gap dimension (max.): 2 mm
EUR 26,80
EUR 382,86/l
Moped fans like you also bought:
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Place of use: Crankshaft · Material: NBR · Width: 7 mm · Ø outside: 33 mm · Ø inside: 17 mm
EUR 10,40
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Width: 10 mm · Ø outside: 32 mm · Ø inside: 12 mm · Area of application: Standard
EUR 9,95
swiing® revival engine seal | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1884)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 140 mm · Number of components: 1 pcs · Ø inside: 87 mm · Total length: 233 mm · Thickness: 0.4 mm · Number of fixing points: 9 pcs · Pony OEM number: A1884 · Sachs OEM no.: 0250 149 100
EUR 6,30
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 130 mm · Number of components: 1 pcs · Total length: 200 mm · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6,30
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Surface: coated · Width: 3.5 mm · Ø outside: 31.5 mm · Ø inside: 14.96 mm · Area of application: Standard · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8,75
NTN 6202 Ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Width: 11 mm · Ø outside: 35 mm · Ø inside: 15 mm
EUR 8,05
Shaft seal FPM 14.96/31.5/3.5 Pinion shaft | Sachs 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 200 °C · Manufacturer: Sachs · Material: FPM - Fluororubber · Place of use: Pinion shaft · Width: 3.5 mm · Ø outside: 31.4 mm · Ø inside: 14.96 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 200 · Sachs OEM no.: 0230 011 100
EUR 15,10
Collection only possible with online purchase and appointment.
