High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
Details
| Ø mounting hole | 6 mm |
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Mounting type | Nuts & bolts |
| Number of fixing points | 9 pcs, 2 pcs |
| Hole spacing | 50 mm |
| Thread length | 6 mm |
| Thread type | M5x0.8 (standard thread) |
| Total length | 175 mm |
| Width | 108 mm |
| Height | 11 mm |
Accessories & related products
Plastic license plate holder
Manufacturer: Made in Switzerland · Thread length: 6 mm · Material: Brass · Material: Plastic · Color: black · Mounting type: Nuts & bolts · Number of fixing points: 9 pcs · Hole spacing: 50 mm · Ø mounting hole: 6 mm · Thread type: M5x0.8 (standard thread) · Total length: 175 mm · Width: 108 mm · Height: 11 mm
EUR 8,10
Serrated lock washer M4 - M12 galvanized
Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Material: Steel · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Surface: galvanized (blue)
EUR 0,35
M6x22 hexagon head screw, galvanized
Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread length: 22 mm · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Surface: galvanized (blue) · Color: silver · Strength class: 8.8 · Thread type: M6x1 (standard thread) · Total length: 26 mm
EUR 1,30
Screw M5x10 pan-head Allen key, galvanized
Drive: Hexagon socket · Screw head: Lens head · Width across flats SW: 3 mm · Thread length: 10 mm · Material: Steel · Surface: galvanized (blue) · Ø External head: 9.5 mm · Shank: No · Strength class: 10.9 · Thread type: M5x0.8 (standard thread) · Total length: 13 mm
EUR 1,05
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Drive: Slot · Screw head: Lens head · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Thread length: 4 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Total length: 6 mm
EUR 2,35
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Total height: 250 mm · Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Stand base - center mount (A): 232 mm · Color: black · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm
EUR 35,10
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Area of application: Original · Area of application: Standard · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Color: black · Mounting type: Screws · Speedometer recording: 48 mm · Switch included: Yes · Number of fixing points: 2 pcs · Battery operated: No · Ø External connection: 6.3 mm · Depth: 147 mm · Width: 125 mm · Height: 90 mm · Piaggio OEM number: 584240
EUR 44,40
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Bulb holder: BA9s · Color: black · Color: red · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Battery operated: No · Depth: 43 mm · Width: 130 mm · Height: 58 mm
EUR 22,20
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 23,30
Collection only possible with online purchase and appointment.
