37.98 mm piston with two 2 mm rectangular piston rings with flank lock (FS) suitable for Sachs 504/2 ACH and 504/1 ACH mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the images.
Tolerance type: B
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Original Sachs spare part number: A4358
Quality product from the Italian manufacturer Meteor.
Details
Nominal diameter | 38 mm |
Manufacturer | Meteor |
Ø outside piston (A) | 37.98 mm |
Compression height (C) | 28 mm |
Curvature (D) | 3 mm |
Total piston height (E) | 53 mm |
Number of piston rings (F) | 2 pcs |
Piston ring mold | Rectangular ring |
Piston ring impact | Flank safety device (FS) |
Piston ring height | 2 mm |
Ø piston pin (B) | 12 mm |
Tolerance group | B |
Piston weight | 77 g |
Suitable for the following models
Sachs | 504 (without pedal shaft) |
Accessories & related products
Meteor piston 37.97 mm type A | Sachs 504
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.97 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Piston weight: 78 g
EUR 65,10
Meteor piston 37.99 mm type C | Sachs 504
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.99 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: C · Piston weight: 77 g
EUR 65,10
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11,40
EUR 25,33/l
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 15 mm · Ø outside: 30 mm · Width: 5.5 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Pony OEM number: A5602 · Sachs OEM no.: 0230 111 100
EUR 9,10
Oil seal NBR 15/35/7 AS crankshaft | Sachs 504, 535 (A4214)
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 35 mm · Width: 7 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized
EUR 10,30
NTN 6202 Ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm · Inner ring width: 11 mm · Manufacturer: NTN · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank
EUR 7,95
Gasket set (1A quality) | Sachs 504, 505, 535
Manufacturer: Made in Italy · Material: Copper · Material: Sealing carton · Material: Sealing paper · Number of components: 5 pcs · Thickness: 0.3 mm · Thickness: 1 mm · Thickness: 2.6 mm · Ø outlet inside: 28 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 81.5 x 51 mm / 58 x 58 mm · Pony OEM number: A4277 · Pony OEM number: A4278 · Pony OEM number: A4279
EUR 18,40