Complete Malossi MHR high-end torque converter unit including Vario for Piaggio mopeds / mopeds.
Selected high-quality materials make this torque converter and clutch set an extremely durable and hard-wearing drivetrain, which is mainly used in the high-end tuning sector.
The following parts are included in the scope of delivery:
The input shaft for the gearbox fits the following (straight-toothed) gear ratios:
Note: For Ciao models, the pulleys must be turned off or the frame must be removed. In addition, as with installation on a Grillo or Bravo, a shorter belt from the scooter range must be used.
There is no longer a starter clutch. The engine must therefore be started with a pull-wire starter, side shifters can no longer be fitted.
A detailed installation manual with pictures is included.
The clutch is not compatible with standard parts of the common torque converter units.
The two matching Malossi gearboxes as well as a matching timing belt can be found in the accessories section along with other parts.
Quality product from the Italian manufacturer Malossi.
Details
Manufacturer | Malossi |
Gearbox type | Vario |
Number of weights | 6 pcs |
Weight Standard weights | 6 g |
Ø Weights | 13 mm |
Length Weights | 16 mm |
Ø External variator | 102 mm |
Suitable for the following models
Piaggio | Si |
Accessories & related products
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
Clutch basket & hub | Sachs 50/2, 503 (A2508/A2947)
Material: Steel · Color: graphite colors · Ø outside: 100 mm · Ø outside: 110 mm · Toothing type: helical toothed · Recording type: Interlocking · Number of teeth: 16 pcs · Height: 41.5 mm · Number of teeth: 62 pcs · Ø inside: 22.5 mm · Area of application: Standard · Pony spare part no.: A1201 · Pony spare part no.: A2947 · Sachs spare part no.: 0234 068 000 · Sachs spare part no.: 0290 035 005
EUR 107,00
GPO flywheel 6V / 17W anticlockwise (Version 2.0) | Puch, Sachs, Belmondo
Manufacturer: GPO · Material: Steel · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: left · Tension: 6 V · Performance: 17 W · Ø cone small inside: 11.5 mm · Ø Internal flywheel: 91.1 mm · Ø cone large inside: 15 mm · Ø Flywheel outside: 116.5 mm · Cone length: 18.5 mm · Cone ratio: 1:5 · Height: 36.1 mm · Weight: 900 g · Thread length: 8 mm · Pony spare part no.: A2600 · Sachs spare part no.: 0286 175 005
EUR 99,10