Universal

29778

KREEM Tank Rust Remover Concentrate PH - SI 1000 g

EUR 48,40

Incl. VAT, plus shipping costs

· EUR 48,40/kg

in stock

Only 5 pieces left.

The KREEM brand rust remover fluid is used to remove rust from the tank of your moped, moped, small motorcycle and motorcycle and is the second step on the way to sealing the tank.
The agent absorbs iron oxide and creates a yellow-brown oxide layer that serves as a primer for the subsequent tank sealant.
The contents are sufficient for fuel tanks with a capacity of 24 liters.

Contents:

  • 1000 g (designed for tank volumes of 24 liters)

Application:

  • Degrease and clean your tank with the KREEM tank cleaner (article 29776 or 29777)
  • Close the opening of the fuel tap with a cork, rubber or wooden plug
  • Mix the concentrate (1000 g) with 24 liters of water (or an appropriately adjusted mixing ratio);C
  • fill the tank to the top with the deruster mixture and maintain the temperature with an immersion heater at 60 - 65 °C (if you don't have an immersion heater to hand, use hot water at 75 °C when preparing the mixture)
  • let the mixture work for 30 - 60 minutes
  • empty your tank into a canister and clean it with water
  • immediately after cleaning with a heater or hot air blower;fter or hot air dryer
  • then blow out the tank with compressed air

Note: Wear protective clothing, eye protection and face protection. The mixed liquid can be used several times depending on the degree of soiling

The complete set with cleaner, rust remover and 2-component sealant can be found under accessories.

Quality product from the German manufacturer KREEM.

Details

ManufacturerKREEM
Tank capacity25 l
Contents [g]1000 g
Hazard warningHarmful if swallowed or in contact with skin, Causes serious eye damage

Accessories & related products

Moped fans like you also bought: