Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 320 mm
Ø outer coil spring: 44 mm
Ø spars: 28 mm
Ø bushings for fastening: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
Details
Manufacturer | IMCA |
Total length | 320 mm |
Mounting type | Nuts & bolts |
Material | Steel |
Surface | varnished |
Color | black |
Damping type | Spring |
Adjustable | Yes |
Ø spars | 28 mm |
Number of fixing points | 2 pcs |
Ø outside | 44 mm |
Ø Fastening inside | 10 mm |
Accessories & related products
IMCA shock absorber 30 cm chrome
Color: Chrome · Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Ø spars: 28 mm · Total length: 300 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts
EUR 57,40
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 24,70
EUR 2.470,00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø spars: 32 mm · Ø outside: 52 mm · Total length: 330 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Color: black
EUR 157,70
IMCA shock absorber 30 cm chrome / black
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø spars: 28 mm · Ø outside: 45 mm · Total length: 300 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Color: Chrome · Color: black
EUR 67,50
Moped fans like you also bought:
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 425 mm · Width: 168 mm · Hole spacing: 29 mm · Mounting type: Nuts & bolts · Height: 32.5 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Number of fixing points: 4 pcs
EUR 22,40
Spotlight round Ø 13 cm chrome / black
Depth: 80 mm · Material: Sheet metal (steel) · Area of application: Standard · Housing material: Metal · Thread size: M6 · Lens material: Plastic · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Color: transparent · Ø outside: 130 mm · Speedometer recording: None · Bulb holder: BA15d · Mounting type: Screws · Number of fixing points: 2 pcs · Test mark: none · Switch included: No · Battery operated: No · Width: 134 mm · Height: 147 mm
EUR 28,10
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,20
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
EUR 14,50