Original right-hand Bosch ignition, which is installed on Puch Maxi S / N mopeds with single-automatic E50 engine, among others.
An external ignition coil as used on some old Puch Maxi mopeds is required for this breaker ignition.
The ignition is equipped with brake light and other power consumers.
Connection diagram:
Blue cable: external ignition coil (excitation current)
Yellow cable: light 6 Volt 22 Watt
Grey cable: additional consumer 6 Volt 5 Watt (e.g. brake light)
Green / black cable: ground
Green cable: Additional consumer 6 volt 10 watt (e.g. horn)
You can find the matching external ignition coil and other add-on parts in the accessories section.
The following number is stamped on the pole wheel: 0 212 124 039
NOS – new from old stock.
Details
Manufacturer | Puch |
Material | Aluminum |
Tension | 6 V |
Performance | 5 W, 10 W, 22 W |
Direction of rotation | right |
Ø mounting plate | 90 mm |
Ø Internal flywheel | 90 mm |
Mounting type | Screws |
Number of fixing points | 4 pcs |
Area of application | Standard, Original, Security, Custom |
Suitable for the following models
Puch |
Accessories & related products
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs
EUR 11,40
GPO blade gauge set 0.05 - 1.00 mm 13 pcs.
Measuring range [mm]: 0.05 - 1 mm · Manufacturer: GPO · Width: 13 mm · Thickness: 0.05 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 0.6 mm · Thickness: 0.7 mm · Thickness: 0.8 mm · Thickness: 0.9 mm · Thickness: 1 mm · Area of application: Measuring tool · Material: Metal · Surface: blank / oiled · Number of components: 13 pcs · Total length: 105 mm
EUR 13,70
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 18.8 mm · Height: 8.9 mm · Width across flats SW: 14 mm · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
EUR 2,75
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs
EUR 11,40