Valuable front light with parking light and low beam made of black matt plastic for Piaggio Si mopeds / mopeds.
The light has side tabs for routing the cable harness.
The front light can be fitted with both conventional P26s bulbs and P26s LED bulbs.
A filament bulb with PS26s socket and a 43 mm socket bulb as indicator light are included in the scope of delivery.
All common speedometers with 48 mm diameter can be installed in the front light.
Ø outside: 130 mm
Hole spacing: 115 mm
Tachometer cut-out: 48 mm
Installed low beam bulb: PS26s 12V - 21W
Installed base bulb: 12V - 10W
Mark: E3 S3
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we can understand your decision, but cannot offer you any guarantee or exchange.
The light fulfills its purpose, but the lamp housing is susceptible to scratches and in some cases already shows slight damage from the factory. In addition, the reflector does not make a particularly high-quality impression.
Matching bulbs, lamp grilles and alternative front spotlights can be found in the accessories section.
Original Piaggio spare part number: 228999, 268074
Good-quality reproduction product from the Asian market.
Details
| Manufacturer | Quenching |
| Test mark | E3 |
| Area of application | Standard |
| Material | Plastic |
| Housing material | Plastic |
| Tension | 12 V |
| Color | black, white |
| Performance | 21 W, 10 W |
| Bulb holder | P26s, Soffit pear |
| Mounting type | Screws |
| Number of fixing points | 2 pcs |
| Switch included | Yes |
| Battery operated | No |
| Ø outside | 130 mm |
| Speedometer recording | 48 mm |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
Tail light black | Piaggio SI
Manufacturer: Made in Italy · Test mark: none · Material: Plastic · Tension: 6 V · Tension: 12 V · Color: black · Color: red · Width: 100 mm · Bulb holder: Soffit pear · Height: 78 mm · Depth: 65 mm · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs
EUR 25,00
66HEROES speedometer 60 km/h Ø 48 mm "mofakult" white
Manufacturer: 66HEROES · Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: white · Ø Receptacle: 48 mm · Maximum speed: 60 Km/h · Thread type: MF10x1 (fine pitch thread) · Lighting: without · Ø outside: 52.4 mm · 4-edge speedometer cable: 2 mm · Depth: 50 mm · Total height: 70 mm
EUR 70,20
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony OEM number: A2099 · Sachs OEM number: 0265 100 00
EUR 10,30
Stand set | Piaggio SI
Manufacturer: Made in Italy · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 265 mm
EUR 29,20
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Mounting type: Union nut · Spare tube shape: straight · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 65 mm
EUR 14,50
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Quantity: 4 pcs · Material: Steel · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm
EUR 23,30
swiing® revival clamping screw front brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Thread type: M7x1 (standard thread) · Surface: galvanized (blue) · Ø shaft: 10.9 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Total length: 21 mm · Screw head: Hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Thread length: 9.5 mm · Number of components: 3 pcs
EUR 6,35
swiing® revival clamping screw rear brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Ø shaft: 10.5 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Total length: 21.5 mm · Screw head: Hexagon · Thread length: 11 mm · Number of components: 3 pcs · Width across flats SW: 11 mm · Width across flats SW: 14 mm
EUR 6,80
Collection only possible with online purchase and appointment.
