40.0 mm replacement piston for your Puch X30 Velux moped / moped and 2- and 3-speed small engine bikes MS, MV, MV50, VSD DS, VZ and MC models with 40 mm cylinder.
The piston kit includes two rectangular piston rings with flank lock (FS).
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Nominal diameter | 40 mm |
Manufacturer | GPO |
Ø outside piston (A) | 39.94 mm |
Compression height (C) | 22.5 mm |
Curvature (D) | 3.4 mm |
Total piston height (E) | 52.45 mm |
Number of piston rings (F) | 2 pcs |
Piston ring mold | Rectangular ring |
Piston ring impact | Flank safety device (FS) |
Piston ring height | 2 mm |
Thick piston ring | 1.65 mm |
Ø piston pin (B) | 12 mm |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Nominal diameter: 40 mm · Manufacturer: GPO · Ø outside piston (A): 39.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm
EUR 39,30
EUR 50,60
Piston 40 mm (10 mm KoBo) | Puch X30 Velux fan-cooled
Nominal diameter: 40 mm · Ø outside piston (A): 39.95 mm · Ø piston pin (B): 10 mm · Compression height (C): 23.6 mm · Curvature (D): 3.4 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm
EUR 54,00
GPO piston pin extractor Ø 10, 12, 14 mm
Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs
EUR 22,40
Moped fans like you also bought:
GPO license plate holder Inox
Thread type: M5x0.8 (standard thread) · Manufacturer: GPO · Total length: 145 mm · Material: Chrome steel (stainless steel) · Width: 105 mm · Thread length: 8 mm · Color: silver · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 2 pcs · Height: 5.3 mm
EUR 12,30
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Manufacturer: GPO · Thickness: 4.5 mm · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Ø inside: 94 mm · Chain pitch: 1/2" x 3/16" · Color: black · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
EUR 22,40
swiing® revival rubber grommet ignition | Puch X30 Z50
Ø Cable bushing: 2.5 mm · Ø Cable bushing: 5.2 mm · Total height: 11.3 mm · Manufacturer: swiing® revival parts · Material: Rubber · Area of application: Standard · Color: black · Surface: raw · Width: 15.6 mm · Height: 3.5 mm · Total length: 19.3 mm
EUR 8,90
EUR 11,20
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Sealing paper · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 - 38 mm
EUR 22,40
GPO light switch with wiring harness base chrome version
Manufacturer: GPO · Total length: 50 mm · Material: Plastic · Housing material: Steel · Width: 30 mm · Substructure material: Steel · Surface: chrome-plated · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Number of cables: 5 pcs · Cable length: 970 mm · Cable bifurcation to motor: 970 mm · Color: Chrome · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Ø Handlebars: 22 mm · Height: 25 mm
EUR 19,00