38.4 mm ¨bermass piston with a 1.5 mm rectangular piston ring with side protection and a 2 mm L-piston ring with internal protection (IS) suitable for various Piaggio mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit is used for bored and honed cylinders.
The piston kit contains the piston pin, piston clips and piston ring.
You will find the appropriate installation tool, piston pin retainers and, if necessary, the corresponding cylinder in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Ø outside piston (A) | 38.35 mm |
Compression height (C) | 26 mm |
Curvature (D) | 3.7 mm |
Total piston height (E) | 51.7 mm |
Number of piston rings (F) | 2 pcs |
Nominal diameter | 38 mm |
Piston ring mold | L-ring, Rectangular ring |
Ø piston pin (B) | 10 mm |
Piston ring impact | Internal fuse (IS), Flank safety device (FS) |
Piston ring height | 2 mm, 1.5 mm |
Weight | 75 g |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Area of application: (Dis)assembly tool
EUR 22,40
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,20
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Width: 27 mm · Performance: 50 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
EUR 33,70