Complete oil seal set suitable for Sachs 3-speed engines that have the pedal axle installed in the engine.
The set consists of 8 oil seals.
- 15/30/7 DUO - 2 pieces
- 14.96/31.5/3.5 - 1 Stück
- 16/24/4 - 2 Stück
- 13/19/2.5 - 1 Stück
- 24.8/31.4/4 - 1 Stück
- 10/16/4.5 - 1 piece
You can find the individual sealing rings under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Width | 2.5 mm, 3.5 mm, 4 mm, 4.5 mm, 7 mm |
| Ø outside | 16 mm, 19 mm, 24 mm, 30 mm, 31.4 mm, 31.5 mm |
| Ø inside | 10 mm, 13 mm, 14 mm, 15 mm, 16 mm, 24 mm |
Suitable for the following models
| Sachs | 50/3 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24,70
EUR 2.470,00/l
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Temperature resistance (min.): -30 - 100 °C · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Width: 7 mm · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Ø outside: 30 mm · Pony spare part no.: A1830 · Sachs spare part no.: 0250 090 000
EUR 6,10
Simmerring set Sachs 3, 4-speed kickstarter
Ø inside: 10 mm · Ø inside: 13.8 mm · Ø inside: 14.96 mm · Ø inside: 15 mm · Ø inside: 17 mm · Width: 2.5 mm · Width: 3.5 mm · Width: 4 mm · Width: 4.5 mm · Width: 7 mm · Ø outside: 16 mm · Ø outside: 19 mm · Ø outside: 24 mm · Ø outside: 30 mm · Ø outside: 31.5 mm
EUR 37,10
Oil seal NBR 10/16/4.5 A Shift shaft | Sachs 50/3, 50/4
Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 10 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Shift shaft · Width: 4.5 mm · Ø outside: 16 mm · Temperature resistance (min.): -30 - 100 °C
EUR 5,50
Oil seal FPM 14.96/31.5/3.5 Pinion shaft | Sachs 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 200 °C · Manufacturer: Sachs · Material: FPM - Rubber · Width: 3.5 mm · Ø outside: 31.4 mm · Place of use: Pinion shaft · Ø inside: 14.96 mm · Pony spare part no.: A1134 · Sachs spare part no.: 0230 011 200 · Sachs spare part no.: 0230 011 100
EUR 14,50
Moped fans like you also bought:
GPO clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Manufacturer: GPO · Material: Composite materials · Material: Steel · Area of application: Standard · Thickness: 3.3 mm · Ø inside: 29.6 mm · Ø inside: 35.6 mm · Recording type: Interlocking · Number of slats: 2 pcs · Ø outside: 93 mm · Pony spare part no.: A3887 · Sachs spare part no.: 0659 010 006
EUR 19,00
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Stock number: E15 · Width: 8 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Area of application: Standard · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 35 mm · Ball bearing closed: No · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
EUR 28,10
Gearbox cover gasket manual transmission | Sachs 50/2, 50/3, 50/4 A1827 0.4 mm (1A quality)
Material: Sealing paper · Number of components: 1 pcs · Thickness: 0.4 mm · Color: sand-colored · Number of fixing points: 5 pcs · Total length: 215 mm · Width: 130 mm · Pony spare part no.: A1827 · Sachs spare part no.: 0250 087 100
EUR 4,30
Oil seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Width: 3.5 mm · Manufacturer: Sachs · Material: NBR · Surface: coated · Place of use: Pinion shaft · Area of application: Standard · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Pony spare part no.: A1134 · Sachs spare part no.: 0230 011 100 · Sachs spare part no.: 0230 011 200
EUR 8,45
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Ø outside: 18 mm · Ø outside: 21 mm
EUR 19,00
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Total length: 250 mm · Width: 170 mm · Manufacturer: swiing® revival parts · Number of fixing points: 16 pcs · Material: Sealing paper · Number of components: 1 pcs · Thickness: 0.4 mm · Color: sand-colored · Ø inside: 86 mm · Pony spare part no.: A1828 · Sachs spare part no.: 0250 088 100
EUR 6,65
Collection only possible with online purchase and appointment.
