Three-arm cylinder and barrel hone. The honing finger can be clamped in standard drill chucks. By pressing the three arms together, the diameter is reduced and the tool can be plunged into the workpiece to be honed. Thanks to the joints, the tool automatically adjusts to the surface to be machined.
However, if there are seizure marks, heavy scoring or traces of corrosion on the cylinder wall, the cylinder should be drilled out to the nearest dimension.
Application range: Ø 30 - 90 mm
Honing stones length: 50 mm (3 pcs.)
Total length: 220 mm
Weight: 110 gr.
Drive shaft: Hexagon 1/4" 6.3 mm
We recommend using the tool with a Ölspray rather than dry. You can find the appropriate spray in the accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Brush head length | 50 mm |
| Manufacturer | GPO |
| Number of components | 1 pcs |
| Material | Steel, Silicon carbide |
| Drive shank Drill chuck | hexagonal |
| Area of application | Workshop accessories |
| Surface | blank |
| Diameter | 32 - 90 mm |
| Total length | 220 mm |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 23,30
SONAX multifunctional oil 400 ml
Manufacturer: SONAX · Oil type: fully synthetic · Area of application: Chemistry · Area of application: Workshop accessories · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health
EUR 12,80
Not in stock
EUR 32,00/l
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Thickness: 4.5 mm · Material: Steel · Surface: powder-coated · Chain type: 415H · Hole spacing: 36.5 mm · Color: black · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs
EUR 23,30
GPO blade gauge set 0.05 - 1.00 mm 13 pcs.
Measuring range [mm]: 0.05 - 1 mm · Manufacturer: GPO · Total length: 105 mm · Width: 13 mm · Thickness: 0.05 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 0.6 mm · Thickness: 0.7 mm · Thickness: 0.8 mm · Thickness: 0.9 mm · Thickness: 1 mm · Area of application: Measuring tool · Material: Metal · Surface: blank / oiled · Number of components: 13 pcs
EUR 14,00
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
EUR 3,30
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
EUR 2,80
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11,60
Collection only possible with online purchase and appointment.
