Gasket set for the 38 mm cylinder and reed valve inlet on your Tomos moped / moped with A3 and A35 engine.
The exhaust gasket is reinforced with a steel mesh and has exceptional temperature resistance thanks to the graphite it contains. The graphite gasket also ensures reliable sealing even at low surface pressures.
The gasket set contains the following flat gaskets:
You can find sealant and other gaskets in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Thickness | 0.35 mm, 0.4 mm, 1.4 mm |
Material | Oiled paper, Aluminum, Graphite / Graphite |
Number of components | 5 pcs |
Hole spacing outlet | 44 mm |
Hole pattern [mm] | 39 x 36, 44 x 44 |
Suitable for the following models
Tomos |
Accessories & related products
Airsal 38 mm cylinder kit 12 mm KoBo | Tomos A35
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Ø cylinder neck: 47 mm · Nominal diameter: 38 mm · Ø outlet inside: 25 mm · Inlet window: 28 / 24 x 38 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 35 mm · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning · Number of fixing points: 4 pcs
EUR 123,90
DMP gasket set cylinder 50 ccm | Tomos A3, A35
Manufacturer: DMP · Material: Aluminum · Material: Bakelite · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 3 pcs · Ø outlet inside: 25.2 mm · Thickness: 0.6 mm · Thickness: 1.3 mm · Thickness: 1.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Standard
EUR 10,00
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Area of application: Tuning · Ø cylinder: 45 mm · Number of components: 5 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Decompressor: Yes
EUR 11,20
Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc
Manufacturer: Elring · Area of application: Chemistry · Contents [ml]: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C
EUR 25,80
EUR 368,57/l
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
EUR 11,20
EUR 24,89/l
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Tire height [%]: 100 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 17 " · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR6 car valve
EUR 16,80
swiing® revival needle roller bearing 12/15/14.2 original
Bearing cage: Sheet steel cage · Manufacturer: swiing® revival parts · Bearing type: Needle sleeve · Ø inside: 12 mm · Ø outside: 15 mm · Width: 14.2 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Alternative version of Sachs spare part no.: 0232 155 001 · Tomos spare part no.: 035548
EUR 10,00
Magura cable clamp Ø 7 x 9 mm
Manufacturer: Magura · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Thread type: M4x0.7 (standard thread) · Number of components: 1 pcs · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Countersunk head · Screw head: Hexagon · Width across flats SW: 6 mm · Ø outside: 7 mm · Total length: 9 mm · Total length: 14.5 mm · Thread length: 6 mm · Area of application: Standard
EUR 2,80
DMP gasket set cylinder 50 ccm | Tomos A3, A35
Manufacturer: DMP · Material: Aluminum · Material: Bakelite · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 3 pcs · Ø outlet inside: 25.2 mm · Thickness: 0.6 mm · Thickness: 1.3 mm · Thickness: 1.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Area of application: Standard
EUR 10,00
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Area of application: Tuning · Ø cylinder: 45 mm · Number of components: 5 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Decompressor: Yes
EUR 11,20
DMP 38 mm cylinder kit slanted exhaust 12 mm KoBo | Tomos Sprint, Quadro, FunSport, Classic
Manufacturer: DMP · Material: Gray cast iron · Surface: varnished · Area of application: Standard · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: Yes · Tomos spare part no.: 229402
EUR 112,60