Practical, galvanized steel tube for reaming fork tubes and other through tubes on your bicycle, moped, moped, small motorcycle and motorcycle.
The reaming tube can be clamped in any standard cordless drill. A cleaning cloth can be clamped through the slots (two different widths), as well as sandpaper in various sizes. The inner diameter of the pipe to be sanded / cleaned is determined by winding several layers around the lance.
Length: 400 mm
&slash; outer: 10 mm
Slot length: 50 mm
Slot width: 1 mm / 2.5 mm
Thread: M8 (splayed)
To use the thread, the tube must be clamped together to the corresponding diameter.
Grinding material, cleaning cloths and cleaning agents can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Area of application | Special tool |
Material | Steel |
Surface | galvanized (blue) |
Total length | 400 mm |
Ø outside | 10 mm |
Accessories & related products
Moped fans like you also bought:
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Width: 17 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Ø Pin: 8 mm
EUR 11,40
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 39,10
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Total length: 175 mm · Number of teeth: 10 pcs · Thread type: M6x1 (standard thread) · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 11,40
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 41.6 mm · Screw head: Cylinder head · Thread type: M7x1 (standard thread) · Ø External head: 10.5 mm · Drive: Hexagon socket · Shank: No · Width across flats SW: 5 mm · Thread length: 34.6 mm · Strength class: 8.8 · Area of application: Standard
EUR 3,35
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Height: 13.8 mm · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Drive: External hexagon · Width across flats SW: 30 mm · Thread depth: 12 mm · Area of application: Standard
EUR 11,40