Exhaust silencer perfectly modeled on the original to fit Zündapp Belmondo mopeds, Zündapp Bergsteiger M25/M50 mopeds, as well as Alpa Spezial 3000 and Alpa Black River small motorcycles which have a Zündapp type 247 engine installed.
The flame tube holder is slotted twice. This makes installation easier and guarantees a precise fit.
Ø outer: 55 mm
Internal connection diameter: 28 mm
Outer connection diameter: 30 mm
Total length: 560 mm
You can find other parts that fit your ignition system in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Manufacturer | GPO |
Material | Steel |
Surface | chrome-plated |
Color | Chrome |
Total length | 560 mm |
Ø Internal connection | 28 mm |
Ø outside | 55 mm |
Ø Flame tube outside | 28 mm |
Exhaust type | Cigar |
Mounting type | Screwed clamp |
Suitable for the following models
Zündapp Belmondo | |
Zündapp | 247 Motor |
Accessories & related products
swiing® revival luggage rack 17" (ESGE) chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Hole spacing: 29 mm · Material: Chrome steel (stainless steel) · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Mounting type: Nuts & bolts · Width: 136 mm · Height: 300 mm · Total length: 360 mm · Wheel size [inch]: 17 " · Number of fixing points: 4 pcs · Ø mounting hole: 6.3 mm · Ø mounting hole: 6.7 mm
EUR 135,10
Not in stock
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 39 mm · Weight: 87 g · Ø outside: 120 mm · Color: black · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Height: 13.5 mm
EUR 67,50
swiing flame tube 28 mm left chrome | Zündapp Belmondo
Total length: 360 mm · Manufacturer: swiing · Ø inside: 25 mm · Ø outside: 28 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Stud bolts & nuts · Hole spacing outlet: 40 mm · Number of fixing points: 2 pcs
EUR 56,20
Moped fans like you also bought:
Transval speedometer drive 17" with grease nipple holder
Thread type: MF10x1 (fine pitch thread) · Manufacturer: Transval · Material: Aluminum · Place of use: left · Place of use: right · Wheel size [inch]: 17 " · Overall width outside: 60 mm · Ø axle: 11 mm · Ø outside: 41 mm · Color: gray · Total height: 52 mm · 4-edge speedometer cable: 1.9 mm · Ø mounting hole: 11 mm
EUR 33,70
swiing® revival gasket outlet | Zündapp Belmondo
Manufacturer: swiing® revival parts · Thickness: 1.5 mm · Total length: 5308 mm · Material: Graphite / Graphite · Place of use: Outlet · Ø inside: 25 mm · Ø outside: 38.3 mm · Hole spacing: 40 mm · Ø mounting hole: 7.1 mm · Number of fixing points: 2 pcs
EUR 4,40
Zündapp Belmondo air filter box
Ø inside: 10 mm · Camouflaged: No · Material: Plastic · Area of application: Standard · Area of application: Tuning · Color: gray · Mounting type: Plug connection clamped · Width: 146 mm · Height: 78 mm · Total length: 148 mm · Number of fixing points: 1 pcs
EUR 101,30
swiing flame tube 28 mm left chrome | Zündapp Belmondo
Total length: 360 mm · Manufacturer: swiing · Ø inside: 25 mm · Ø outside: 28 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Stud bolts & nuts · Hole spacing outlet: 40 mm · Number of fixing points: 2 pcs
EUR 56,20