Original reproduction air filter for your Puch Supermaxi LG1, LG2 moped / moped with catalytic converter.
The air filter box is supplied in disassembled condition.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
Carburetor connection diameter with Büchse: 20 mm (can also be mounted on a normal Puch Maxi S or N, but the flange must be shortened)
Carburetor connection diameter without Büchse: 28 mm
Select the desired air filter screen in the selection field:
- Standard: original air filter screen
- Racing: Screen with fewer filter layers for more air flow
- Tuning: two-layer filter mat for maximum air flow
Note: From the factory, a joint with silicone sealant was drawn around the seam of the original air filter after the two parts were joined to eliminate the risk of air leakage. We recommend doing the same with this air filter.
You will find a suitable sealant and other useful parts in the accessories section.Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Camouflaged: Yes · Color: black · Material: Plastic · Filter type: Box · Ø Internal connection: 20 mm, 28 mm · Mounting type: Plug connection clamped · Area of application: Tuning
Details
Manufacturer | GPO |
Camouflaged | Yes |
Material | Plastic |
Color | black |
Area of application | Standard, Tuning |
Mounting type | Plug connection clamped |
Filter type | Standard sieve, Racing screen, Foam |
Ø Internal connection | 28 mm |
Suitable for the following models
Puch |
Accessories & related products
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Total length: 6 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 17,90
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: gray · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 22,40
EUR 320,00/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs
EUR 3,15
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 14,50
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Surface: raw · Area of application: Tuning · Mounting type: Plug connection clamped · Total length: 65 mm · Carburetor type: SRE · Nominal diameter: 17 mm · Width: 47 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Height: 89 mm · Height: 109 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 135,10
swiing® ingenious intake manifold 17 mm SRF | Puch E50
Total height: 53.5 mm · Manufacturer: swiing® ingenious parts · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Ø inside: 17 mm · Mounting type: Stud bolts & nuts · Ø External connection: 23 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Height flange center hole: 42 mm · Total length: 38 mm · Camouflaged: Yes
EUR 50,60