Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc nikasil-coated racing cylinder made of aluminum convinces with its good workmanship and long service life.
To get the full power out of the tuning cylinder, a racing exhaust and a carburettor with plenty of oomph should be fitted.
The scope of delivery includes all necessary gaskets, piston pins, piston rings and circlips.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
Nominal diameter | 44 mm |
Manufacturer | GPO |
Material | Aluminum |
Surface | sandblasted |
Displacement | 65 ccm |
Crankshaft stroke | 43 mm |
Ø cylinder neck | 47.8 mm |
Ø outlet inside | 22.8 mm |
Inlet window | 35.5 x 29.5 |
Thread inlet | M5x0.8 (standard thread) |
Hole spacing inlet | 36 mm, 39 mm |
Ø piston pin (B) | 12 mm |
Hole spacing outlet | 42 mm |
Outlet type | slanted |
Thread outlet | M6x1 (standard thread) |
Area of application | Tuning |
Number of fixing points | 4 pcs |
Hole pattern [mm] | 44 x 44 |
Decompressor | No |
Camouflaged | No |
Suitable for the following models
Tomos |
Accessories & related products
GPO piston 44 mm (12 mm KoBo) | Tomos A3/A35
Manufacturer: GPO · Ø outside piston (A): 43.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm
EUR 42,70
Not in stock
Moped fans like you also bought:
Main stand black | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Surface: varnished · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm · Color: black
EUR 22,40
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Material: Aluminum · Color: black · Carburetor type: SHA (type 4) · Ø Internal connection: 19 mm · Total length: 82 mm · Ø without reducing sleeve: 21 mm · Width: 72 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mounting type: Plug connection clamped · Height: 111 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5 · Area of application: Tuning · Camouflaged: No · Nozzle size: 82
EUR 78,80
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 23,60
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8,35