GPO 38 mm tuning cylinder without seal and a large outlet suitable for various Puch mopeds (Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 NG-2A, as well as Puch Supermaxi).
Thanks to the 6 exhaust ports, speeds of up to 50 km/h are possible with this cylinder.
The slightly larger cooling fins also ensure better cooling.
The matching stud bolts for the intake and exhaust can be found in the accessories.
Scope of delivery according to figure 1.
This racing kit is also offered in other stores under the names DMP, PSR, Power One or Akoa. However, it is actually just a good, inexpensive standard replacement part. GPO – GOOD PARTS ONLY.
Details
Nominal diameter | 38 mm |
Manufacturer | GPO |
Material | Cast aluminum |
Surface | sandblasted |
Displacement | 50 ccm |
Crankshaft stroke | 43 mm |
Number of fixing points | 4 pcs |
Thread inlet | M6x1 (standard thread) |
Hole spacing inlet | 38 mm |
Area of application | Tuning |
Ø piston pin (B) | 12 mm |
Hole spacing outlet | 42 mm |
Outlet type | straight |
Thread outlet | M6x1 (standard thread) |
Hole pattern [mm] | 44 x 44 |
Camouflaged | No |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO piston 38 mm 6-channel | Puch
Nominal diameter: 38 mm · Manufacturer: GPO · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 4.9 mm · Total piston height (E): 53.85 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.45 mm
EUR 43,90
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
EUR 8,35
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
EUR 13,40
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
EUR 3,15
swiing® revival set stud bolts M6 x 106 mm | Puch
Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Total length: 106 mm · Material: Steel · Surface: blue galvanized · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
EUR 8,35
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch spare part no.: 900.1216 · Puch spare part no.: 901.1308
EUR 11,20