Gearwheel 2nd gear 18 teeth NOS | Puch (40 km/h version)

Cylindrical roller Ø 3.5x7.5 mm Gearbox | Puch Z50

Manufacturer: Puch · Material: Steel · Surface: Hardened · Area of application: Standard · Diameter: 3.5 mm · Width: 7.4 mm

Countershaft 17 / 11 teeth NOS | Puch Z50

Manufacturer: Puch · Toothing type: straight toothed · Number of teeth: 11 pcs · Ø outside: 12.4 mm · Ø outside: 15 mm · Number of teeth: 17 pcs · Total length: 99 mm · Puch spare part no.: 349.1.13.201.1

swiing® revival motor revision set large | Puch X30 Velux

Manufacturer: swiing® revival parts · Area of application: Standard

GPO clutch plates (pair) | Puch X30

Manufacturer: GPO · Area of application: Standard · Number of slats: 2 pcs

BERU spark plug connector / 1 kΩ interference suppressed

Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00

GPO sprocket 15 teeth (wide) | Puch

Manufacturer: GPO · Material: Steel · Surface: Hardened · Ø inside: 13.7 mm · Ø inside: 16.9 mm · Chain type: 415H · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Number of teeth: 15 pcs · Total thickness: 4.6 mm

swiing® revival gasket set Z50 engine | Puch X30 NS / NL

Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44

swiing® revival gearbox cover gasket (old model) | Puch Z50 engine

Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Color: sand-colored · Thickness: 0.35 mm · Width: 155 mm · Total length: 166 mm · Number of fixing points: 8 pcs

Nut flywheel M10x1 SW15 serrated

Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 15 mm · Ø outside: 19.8 mm · Height: 10.5 mm · Area of application: Standard

Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm

Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Area of application: Standard

swiing® revival engine gasket | Puch Z50 engine X30 NS, NL

Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 167 mm · Thickness: 0.4 mm · Ø inside: 74 mm · Total length: 240 mm · Number of components: 1 pcs · Number of fixing points: 12 pcs

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Recording type: Cross shot · Ø inside: 13.35 mm · Ø outside: 43 mm · Width: 8 mm · Puch spare part no.: 050.1.1410

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)

Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Recording type: Interlocking · Ø outside: 12.35 mm · Ø outside: 16.75 mm · Total length: 90.5 mm · Puch spare part no.: 350.2.13.020.1