Front, partially round mudguard made of bright steel for your Piaggio Ciao moped with 16" cast or 17" spoke rims.
For mounting the mudguard, all original holes are provided to mount the mudguard to the front of the original fork. In addition, the three holes on the right-hand side are intended for mounting the original cable routing. There are also two holes for attaching the original edge protection or splash guard flap.
Details
| Material | Steel |
| Surface | blank |
| Wheel size [inch] | 16 ", 17 " |
| Folding the ends | open folded |
| Shape of the mudguard | partly round |
| Total length over ends | 510 mm |
| Mounting type | Nuts & bolts |
| Scope | 640 mm |
| Wide mudguard profile | 76 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 162 mm |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
swiing® revival front fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Mounting type: Nuts & bolts · Piaggio OEM number: 274184
EUR 40,30
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 12,60
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 11,40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated
EUR 2,30
swiing® revival rear fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Folding the ends: open folded · Color: Chrome · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Mounting type: Nuts & bolts · Piaggio OEM number: 576135
EUR 40,30
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 23,00
Handlebar Ø 21 mm with stem 23.5 cm | Piaggio Ciao
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Front boom mounting · Ø outside: 22 mm · Ø Stem: 21 mm · Stem height: 160 mm · Height: 260 mm · Length handlebar ends: 160 mm · Width: 600 mm · Crossbar: No
EUR 80,70
Collection only possible with online purchase and appointment.
