18 mm replica exhaust suitable for Puch Maxi S & N mopeds.
The exhaust is a one-piece, welded, with the corresponding original number.
The M7 screw at the end of the flame pipe should always be locked with an additional nut, otherwise the nut may loosen and the muffler insert may fall out.
Attention: The sound of the replica exhaust systems can be slightly louder than the original, to remedy this, you can wrap wool around the muffler. You will find this in the accessories section below.
A quality product made in Portugal.
Details
| Total length | 920 mm |
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø Silencer | 59 mm |
| Ø Internal connection | 14 mm |
| Ø Flame tube outside | 18 mm |
| Exhaust type | Flute |
| Mounting type | Welded lug |
| Number of fixing points | 4 pcs |
| Flame tube attachment | Flange |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) |
Accessories & related products
Stop nut M7 Inox
Material: Chrome steel (stainless steel) · Nut type: Self-securing nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 0,80
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Surface: sandblasted · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Height: 55 mm · Decompressor: No
EUR 37,10
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Color: gray · Width: 50 mm · Carburetor type: SRE · Height: 108 mm · Total length: 65 mm · Nominal diameter: 12 mm · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.15 · Camouflaged: No · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Area of application: Standard
EUR 78,80
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Ø inside: 12 mm · Total length: 45.5 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Total height: 53 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Camouflaged: No · Area of application: Original
EUR 39,30
swiing® revival 38 mm original cylinder 1.6 PS | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Nominal diameter: 38 mm · Ø outlet inside: 19 mm · Ø Inlet inside: 9 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Standard · Number of fixing points: 4 pcs · Alternative version of the Puch spare part no.: 349.7.10.105.0
EUR 118,20
swiing nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 24,70
Collection only possible with online purchase and appointment.
