Hydraulic telescopic fork of the EBR brand suitable for Piaggio Ciao mopeds.
Special bracket for mounting a disc brake system. The lower mounting hole is 53 mm above the wheel axle.
The two mounting holes with Ø8.7 mm are 61 mm apart. The upper hole is therefore 114 mm above the wheel axle.
The two aluminum end bolts on the fork legs make it much easier to change the oil.
The solid fork is largely made of aluminum.
The snap ring is included in the scope of delivery. Further accessories can be found below.
Total length: 67 cm
Head tube length: 220 mm
Internal diameter of head tube (for stem mounting): 21.5 mm
Internal distance between fork legs (for mounting the rear axle): 120 mm
Head tube thread: 1" / 24G
Branded product from the Italian manufacturer EBR.
Details
Thread type | FG25.4 (1" 24G) |
Manufacturer | EWC |
Material | Aluminum, Steel |
Surface | varnished, chrome-plated |
Color | black, Chrome |
Adjustable | Yes |
Ø spars | 28 mm |
Spar end distance (center-center) | 150 mm |
Thread length | 58 mm |
Ø outer head tube | 25.4 mm |
Ø head tube inside | 21 mm |
Head tube length | 220 mm |
Total length | 660 mm, 635 mm |
Fork bridge - center wheel axle | 390 mm |
Distance brake cam to wheel axle center-center | 35 mm |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao |
Accessories & related products
GPO control bearing set | Piaggio Ciao
Height: 10.5 mm · Height: 17 mm · Bearing type: Bearing ring · Manufacturer: GPO · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Material: Steel · Surface: blue galvanized · Color: silver · Thread type: FG25.4 (1" 24G) · Ø mounting frame: 30.05 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
EUR 21,30
swiing® revival front fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: open folded · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Color: Chrome · Total height from support surface to top edge: 162 mm · Mounting type: Nuts & bolts · Piaggio spare part no.: 274184
EUR 39,30
Not in stock
swiing® revival front fender Inox black | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: black · Surface: varnished · Mounting type: Nuts & bolts · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Wheel size [inch]: 16 " · Wheel size [inch]: 17 "
EUR 56,20
Clamping screw front brake original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Area of application: Original · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Drive: External hexagon · Total length: 20.5 mm · Screw head: Hexagon · Thread length: 13.5 mm · Width across flats SW: 11 mm · Number of components: 7 pcs · Piaggio spare part no.: 154533
EUR 19,00
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Total length: 6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Screw head: Lens head · Ø outside: 5 mm
EUR 2,25
Brake caliper, brake hose & brake lever for EBR forks
Hole spacing: 32 mm · Hole spacing: 60 mm · Material: Cast aluminum · Color: gray · Surface: varnished · Mounting type: Nuts & bolts · Thread type: M8x1.25 (standard thread) · Brake lever length (lever length): 162 mm · Cable length: 900 mm · Ø Handlebars: 22 mm · Number of fixing points: 4 pcs
EUR 184,70