Black EBR standard fork for Puch X30 NS, NL, NG-2AH and Supermaxi LG1 and LG2 mopeds/mopeds.
Threads are provided on the fork plate for handlebar mounting using two clamps.
To mount the mudguard arch, there is a tab with two holes per fork leg.
Ø inner head tube (for stem mounting): 22 mm
Head tube length: 180 mm
Installation height (center of wheel axle to top edge of lower fork crown): 375 mm
Total length: 570 mm
Head tube thread: M26x1
Thread length on head tube: 60 mm
Distance center of bars - center of bars: 124 mm
Distance center - center of fender arch: 36 mm
Ø fender arch mounting hole: 6 mm
Dimension lower edge of lug from axle center: 56 mm
Dimension lower edge of brake anchor block from axle center: 30 mm
Dimension brake anchor block: 25.5 x 8.2 mm
Hole pattern for clamping blocks: 60 x 30 mm
Thread for clamping blocks: M7x1
Note: Small adjustments may be required to the cam, which engages in the brake anchor plate. The edges and corners should be slightly rounded to ensure a proper fit.
You can find a headset set, clamps or a matching mudguard arch in the accessories section.
Branded product from the Italian manufacturer EBR.
Details
Thread type | MF26x1 (fine pitch thread) |
Manufacturer | EWC |
Color | black, Chrome |
Material | Steel |
Surface | varnished, chrome-plated |
Adjustable | No |
Ø spars | 23 mm |
Spar end distance (center-center) | 120 mm |
Thread length | 58 mm |
Ø outer head tube | 26 mm |
Ø head tube inside | 22.2 mm |
Head tube length | 178 mm |
Total length | 570 mm |
Fork bridge - center wheel axle | 375 mm |
Distance brake cam to wheel axle center-center | 35 mm |
Suitable for the following models
Puch |
Moped fans like you also bought:
swiing® revival snap ring low control bearing set (version 2.0)
Height: 7 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
EUR 2,80
GPO pedal cranks pair chrome | Puch
Manufacturer: GPO · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 180 mm · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Wide intake: 28 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
EUR 84,40
GPO steerer tube nut M26x1 closed fork plate chrome
Height: 13.8 mm · Width across flats SW: 30 mm · Manufacturer: GPO · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Area of application: Standard · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Thread depth: 12 mm
EUR 11,20
GPO mudguard arch 17" front chrome
Manufacturer: GPO · Ø outside: 14 mm · Material: Steel · Outer width: 130 mm · Color: Chrome · Surface: chrome-plated · Total length: 270 mm · Mounting type: Nuts & bolts · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Number of fixing points: 6 pcs · Wide intake: 115 mm · Wheel size [inch]: 17 " · Hole spacing: 35 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.4 mm
EUR 22,40