Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_dellorto

Universal

20175

Dell'Orto 17 mm PHBG AS carburetor hand choke

Home
| Motor
| Carburetor & intake system
| Carburetor
EUR 146,00

Incl. 20% VAT.

17 mm PHBG racing carburetor for universal use for your moped, moped and small motorcycle.
This high-quality racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 70 cc.

The tuning carburetor has a manually operated choke (start slide / starter flap). The cover is newly screwed for easy installation.
The fuel/air mixture can be perfectly adjusted using the main and secondary lines and the mixture adjustment screw.

The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.

Main thread size (M5): 78 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 60
Air filter connection diameter: 32 mm (M32 x 1.25)
Inlet connection diameter: 24 mm (or 26 mm after removing the reducer). 26 mm after removing the reducing sleeve)
Total height: 125 mm
Total width: 75 mm

Matching nozzles, air filters and intake manifolds can be found in the accessories section.

Quality product from the Italian manufacturer Dell'Orto.

Details

ManufacturerDell'Orto
MaterialAluminum
Component group CarburetorCarburetor complete
Colorblack
Carburetor typePHBG AS
Total length71.6 mm
Nominal diameter17 mm
Ø Internal connection24 mm
Nozzle size78
Ø without reducing sleeve26 mm
Ø Air filter connection32 mm
Area of applicationTuning
Air filter connection threadMF32x1.25 (fine pitch thread)
Ø fuel hose connection6 mm, 5.3 mm
Width66 mm
Mixed oil connectionNo
Height123 mm
Vacuum connectionYes
Choke controlHand choke
Choke nozzle size60
Nozzle threadM5x0.8 (standard thread)
Nozzle block262AU
CamouflagedNo
Size of secondary nozzle50
Mounting typePlug connection clamped

Accessories & related products

18.5 mm intake manifold Dell'Orto PHBG | Puch E50

For: Puch

10659

18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Material: Aluminum · Color: Chrome · Surface: polished · Ø inside: 18.8 mm · Mounting type: Screws · Area of application: Tuning · Total length: 40 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 45 mm · Ø External connection: 23.9 mm · Camouflaged: No · Total height: 57 mm

EUR 20,90

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Area of application: Standard · Cable length: 1650 mm

EUR 3,30

swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm · Drive: Slot

EUR 24,40

swiing nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10903

swiing nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG

Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Total length: 8 mm · Drive: Slot

EUR 24,40

swiing nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

17985

swiing nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG

Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Total length: 8 mm · Drive: Slot

EUR 24,40

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
undefined
angle-right

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos

22000

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120 · Nozzle thread: M5x0.8 (standard thread)

EUR 4,10

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm
undefined

Universal

23762

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm

Manufacturer: Dell'Orto · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Nozzle type: Choke nozzle · Nozzle size: 60 · Drive: Slot

EUR 12,70

66HEROES Air filter mushroom grille black Dell'Orto PHBG (Ø=28 mm)
undefined

Universal

25363

66HEROES Air filter mushroom grille black Dell'Orto PHBG (Ø=28 mm)

Manufacturer: 66HEROES · Color: black · Ø outside: 60 mm · Filter type: Grille · Total length: 70 mm · Ø Internal connection: 28 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Camouflaged: No

EUR 22,10

66HEROES Mushroom air filter grille 28 - 32 mm black
undefined

Universal

26152

66HEROES Mushroom air filter grille 28 - 32 mm black

Manufacturer: 66HEROES · Material: Metal · Material: Rubber · Color: black · Ø outside: 60 mm · Filter type: Grille · Total length: 114 mm · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Camouflaged: No

EUR 18,60

Not in stock

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
undefined
angle-right

Universal

27204

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice

Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70

EUR 5,70

Moped fans like you also bought:

Large outlet seal with metal ring

For: Puch

10113

Large outlet seal with metal ring

Place of use: Outlet · Material: Sealing carton · Material: Sheet metal (steel) · Reinforced: Yes · Ø outlet inside: 27 mm · Area of application: Tuning · Thickness: 2.1 mm · Ø screw holder: 6.3 mm · Hole spacing outlet: 42.5 mm

EUR 3,50

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos · Alpa Chopper / Turbo · DKW · ILO / JLO · Kreidler · MBK · Miele · Monark · Victoria · Zündapp

10173

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm

EUR 3,30

18.5 mm intake manifold Dell'Orto PHBG | Puch E50

For: Puch

10659

18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Material: Aluminum · Color: Chrome · Surface: polished · Ø inside: 18.8 mm · Mounting type: Screws · Area of application: Tuning · Total length: 40 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 45 mm · Ø External connection: 23.9 mm · Camouflaged: No · Total height: 57 mm

EUR 20,90

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Area of application: Standard · Cable length: 1650 mm

EUR 3,30

swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Total length: 8 mm · Drive: Slot

EUR 24,40

AKOA 21 mm intake manifold Dell'Orto PHBG | Puch
undefined

For: Puch

10977

AKOA 21 mm intake manifold Dell'Orto PHBG | Puch

Manufacturer: AKOA · Material: Plastic · Color: black-matt · Ø inside: 20.7 mm · Mounting type: Screws · Area of application: Tuning · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Ø External connection: 26 mm

EUR 35,00

Airsal intake manifold 46 / 47 mm cylinder | Puch
undefined

For: Puch

11848

Airsal intake manifold 46 / 47 mm cylinder | Puch

Manufacturer: Airsal · Material: Aluminum · Ø inside: 19 mm · Mounting type: Screws · Area of application: Tuning · Total length: 60 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 65 mm · Ø External connection: 24 mm · Camouflaged: No · Total height: 75 mm

EUR 46,60

Exhaust clamp 70 mm chrome wide version.
undefined

Universal

18313

Exhaust clamp 70 mm chrome wide version.

Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Width: 28 mm · Nominal diameter: 70 mm · Clamping diameter: 67 - 71 mm · Thickness: 2 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.2 mm

EUR 11,60

Polini 30° air filter Air Box Ø 32 mm
undefined

Universal

20115

Polini 30° air filter Air Box Ø 32 mm

Manufacturer: Polini · Color: black · Color: blue · Angle: 30 ° · Filter type: Foam · Total length: 110 mm · Ø Internal connection: 32 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Camouflaged: No

EUR 40,80

swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust)
undefined

Universal

23446

swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust)

Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Ø Internal connection: 28 mm · Mounting type: Screwed clamp · Exhaust type: Cigar

EUR 116,80

excitement
  • Youtube
  • Facebook
  • Instagram
excitement-mobile
PrepaymentInvoiceVisaMastercardPostFinancePayPalTWINTKlarna