Coaster hub HR 90V with sprocket 32 t. (with water damage) NOS | Puch x30 Velux Automat

swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized

Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm

Sprocket 32 teeth (welded) NOS | Sachs HR90 hub

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Sachs · Material: Steel · Surface: blue galvanized · Color: silver · Number of teeth: 32 pcs · Thickness: 4.1 mm · Ø bolt circle: 107 mm · Ø inside: 90 mm

ESJOT sprocket 40 teeth | Sachs HR90 hub (welded)

Ø inside: 90 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 40 pcs

swiing® ingenious brake shoes Ø 90 x 17 Racing slotted

Width: 17 mm · Manufacturer: swiing® ingenious parts · Number of springs: 1 pcs · Ø drum: 90 mm · Springs included: Yes · Color: silver · Ø locating bolt: 10 mm · Slotted: Yes · Area of application: Racing

swiing® revival revision set back pedal | Puch / Sachs / Hercules / Zündapp

Manufacturer: swiing® revival parts

Sachs coaster hub HR 905 "ULTRA-RAR" NOS

Manufacturer: Sachs · Ø drum: 90 mm · Ø axle: 10.5 mm

Coaster hub HR 90V with sprocket 34 t. NOS | Puch X30 Velux HG

Manufacturer: Sachs · Area of application: Original · Ø drum: 90 mm · Color: silver · Ø axle: 10.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Puch spare part no.: 320.5.41.002.0

Brake anchor plate HR 90V not cranked Ø 90 mm rear NOS | Puch X30 Velux Automat / Sachs

Ø bore: 10.7 mm · Manufacturer: Sachs · Ø drum: 90 mm · Material: Steel · Surface: varnished · Ø External brake pads: 98.3 mm · Ø axle: 10.5 mm · Ø outside: 89.3 mm · Puch spare part no.: 320.4.41.007.2

Coaster hub with sprocket 37 T. NOS | Zündapp Belmondo / Hercules

Manufacturer: Sachs · Area of application: Original · Ø drum: 90 mm · Material: Aluminum · Material: Steel · Surface: blue galvanized · Surface: chrome-plated · Ø axle: 10.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø bolt circle: 105.5 mm

Coaster hub with sprocket 50 t. for 17 inch NOS | Sachs 504 HG

Manufacturer: Sachs · Area of application: Original · Ø drum: 90 mm · Surface: blue galvanized · Surface: chrome-plated · Ø axle: 10.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø bolt circle: 105.5 mm

Wheel hub rear wheel rod brake (with slight damage) wide version (DE version) NOS

Manufacturer: Sachs · Area of application: Original · Ø drum: 90 mm · Color: silver · Ø axle: 12 mm · Thread type: MF12x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø spoke hole: 3.2 mm

swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 59 mm · Ø Silencer: 54.5 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Total length: 910 mm · Flame tube attachment: Flange · Number of fixing points: 4 pcs

KMC drive chain 415H (reinforced) 128L

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm

GPO license plate holder Inox

Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Material: Chrome steel (stainless steel) · Thread type: M5x0.8 (standard thread) · Color: silver · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Total length: 145 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs

swiing® revival snap ring low control bearing set (version 2.0)

Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Height: 7 mm · Sachs spare part no.: P0521 · Puch spare part no.: 349.1.30.015.1

Magura cable holder

Ø Nipple hole: 6.2 mm · Manufacturer: Magura · Material: Brass · Area of application: Standard · Surface: nickel-plated · Color: silver · Total length: 14.5 mm · Ø Cable bushing: 4 mm · Ø Bundle: 10 mm · Ø outside: 8 mm

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: blue galvanized · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm

Magura cable end sleeve 5 mm (1A quality)

Ø Cable bushing: 2.5 mm · Manufacturer: Magura · Ø inside: 5 mm · Material: Brass · Surface: nickel-plated · Color: silver · Ø outside: 5.5 mm · Area of application: Standard · Total length: 12 mm

Puch inlet gasket original

Material: Sealing paper · Area of application: Original · Thickness: 0.35 mm · Place of use: Admission · Ø inside: 15 mm · Ø screw holder: 6.3 mm · Hole spacing inlet: 32.5 - 38 mm

GPO tail light ULO | Puch Maxi N, S old version

Manufacturer: GPO · Material: Plastic · Test mark: none · Bulb holder: BA15s · Tension: 6 V · Color: black · Color: red · Ø Receptacle: 4 mm · Width: 60 mm · Height: 110 mm · Mounting type: Nuts & bolts · Depth: 80 mm · Battery operated: No · Number of fixing points: 2 pcs

Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm

Ø Stranded wire: 1.2 mm · Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Brass · Material: Steel · Surface: blue galvanized · Nipple shape: Barrel (transverse) · Area of application: Standard · Cable length: 2000 mm