Reproduction of the original Puch E50 gearbox, consisting of a clutch basket and a spur gear suitable for your Puch Maxi and Supermaxi P1 moped / moped with E50 and E50A engine.
The original clutch and starter clutch can be used with this basket.
Normal gear ratio of 19:96 teeth with helical toothing.
The helical-toothed gears run more smoothly than straight-toothed gears.
Clutch basket:
- Welded press fit, no spinning possible, even under higher loads
- Special sliding bush is already press-fitted
Spur gear:
- Spur gear made from cast material
- Slightly more solid design than original
Notes: Clutch basket and spur gear should always be used together. There may be a slight "singing" when the clutch basket is used with the original spur gear. This gearbox is suitable for the 3-bearing and 4-bearing housings. Depending on the tolerances, shims may need to be used so that the gear wheel does not rub against the housing.
High-quality alternatives can be found in the accessories section.
Original Puch spare part number: 344.1.13.350.0
Details
| Material | Steel |
| Toothing type | helical toothed |
| Recording type | Interlocking |
| Number of teeth | 19 pcs, 96 pcs |
| Area of application | Standard |
Suitable for the following models
| Puch | E50 |
Accessories & related products
MBR clutch basket 19 teeth Racing angled | Puch E50
Manufacturer: MBR · Material: Steel · Color: silver · Ø Receptacle: 31.1 mm · Ø outside: 100.5 mm · Toothing type: helical toothed · Ø inside: 15 mm · Ø inside: 17 mm · Recording type: Interlocking · Number of teeth: 19 pcs · Height: 49 mm · Area of application: Tuning
EUR 216,20
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: Original · Area of application: Standard · Thickness: 20.9 mm
EUR 58,30
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Decompressor: Yes
EUR 11,60
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Capacity: 0.2 µF · Ø outside: 18 mm · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 27 mm · Area of application: Original · Area of application: Standard · Thread type: M3x0.5 (standard thread) · Alternative version of the Pony OEM number: A2090 · BOSCH OEM number: 2 207 330 050 · Alternative version of the Sachs OEM number: 0265 052 003 · Pony OEM number: A2092 · Sachs OEM no.: 0265 052 007
EUR 23,30
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Ø axle: 4 mm · Cable available: Yes · Area of application: Original · Area of application: Standard · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · BOSCH OEM number: 1 217 013 025 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · Pony OEM number: A4607 · BERU OEM number: 0 340 100 710 · Sachs OEM no.: 0283 116 102
EUR 23,20
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Color: Chrome · Surface: chrome-plated · Wheel size [inch]: 17 " · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Total length: 305 mm · Number of fixing points: 4 pcs · Ø mounting hole: 12.5 mm
EUR 17,40
swiing crankshaft Racing Tomos
Manufacturer: swiing · Cheek type: Full cheeks · Connecting rod length center-center: 115 mm · Total length of crankpin on clutch side: 93 mm · Total length crankpin ignition side: 64 mm · Ø crank webs: 70 mm · Area of application: Racing · Ø piston pin (B): 12 mm · Thread type: MF10x1 (fine pitch thread) · Wide crank webs: 34 mm · Tomos OEM number: 223421
EUR 157,70
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4,55
Collection only possible with online purchase and appointment.
