Socket axle M11x200 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels (shortened) and rear wheels.
The complete rear axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Other threaded shafts and individual parts of this set can be found in the accessories section.
Made by the Italian brand CIF.
Details
| Manufacturer | CIF |
| Ball bearing closed | No |
| Material | Steel |
| Surface | galvanized (blue) |
| Width across flats SW | 17 mm, 15 mm |
| Total length | 200 mm |
| Shank length | 14.5 mm |
| Ø shaft | 10.3 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Thread length | 92 mm |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Height | 10 mm, 4 mm, 2 mm |
Suitable for the following models
| Puch | |
| Sachs |
Accessories & related products
Wheel axle set M12x1 x 165 mm front
Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Width across flats SW: 19 mm · Total length: 165 mm · Height: 9.9 mm · Shank length: 114 mm · Ø shaft: 11.9 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 25 mm · Thread length: 26 mm
EUR 17,20
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,60
EUR 2.560,00/l
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Diameter: 17.95 mm · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats SW: 15 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 51,80
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 11,60
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø outside: 19 mm · Width across flats SW: 15 mm · Height: 12 mm · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 9,25
Collection only possible with online purchase and appointment.
