Socket axle M11x165 made of galvanized steel for the front wheel on your Piaggio moped / moped.
The complete axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Note: On Piaggio Ciao models, this wheel axle is 20 mm (10 mm per side) longer than the original installed at the time.
You can find more threaded shafts and the high-quality alternative in the accessories section.
Made by the Italian brand CIF.
Details
| Total length | 165 mm |
| Manufacturer | CIF |
| Material | Steel |
| Surface | galvanized, blue galvanized |
| Ø shaft | 10.3 mm |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Width across flats SW | 17 mm, 15 mm |
| Height | 10 mm, 4 mm, 2 mm |
| Shank length | 18 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Ball bearing closed | No |
| Thread length | 73 mm |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Grillo |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 24,70
EUR 2.470,00/l
Hot 
swiing® ingenious front wheel bearing kit cast wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ball bearing closed: Yes · Width: 9 mm · Total length: 53.5 mm
EUR 33,30
swiing® ingenious wheel axle with bearing kit cast wheel | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: blue galvanized · Diameter: 14.9 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø inside: 11.25 mm · Total length: 145 mm · Ball bearing closed: Yes
EUR 67,50
Not in stock
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Ø outside: 5 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2,25
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: CIF · Total length: 25 mm · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 6 pcs · Drive: External hexagon · Screw head: Hexagon · Ø outside: 11 mm · Width across flats SW: 11 mm · Thread type: M7x1 (standard thread) · Thread length: 19.5 mm
EUR 4,40
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Bearing type: Bearing ring · Thread type: FG25.4 (1" 24G) · Color: silver · Ø mounting frame: 30.05 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Height: 10.5 mm · Height: 17 mm
EUR 21,30
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 22,40
Hot
swiing® ingenious front wheel bearing kit cast wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ball bearing closed: Yes · Width: 9 mm · Total length: 53.5 mm
EUR 33,30
Collection only possible with online purchase and appointment.
