Chromed side covers for the left and right side suitable for Puch Maxi S mopeds / mopeds with E50 engine.
These frame covers are a higher quality, harder version.
If you want to install these side covers on a Puch Maxi S-2A moped with a 2-speed engine, you will need to remove the right-hand side protection slightly in the area of the clutch cover.
The frame covers are sturdy and offer sufficient space for large pedals. The front connection is also very well done. However, there are small shortcomings, as the space for the fuel hose and the clutch lever is tight. Nevertheless, the covers are easy to fit.
Alternative chain guards and the cheaper but softer side covers can be found in the accessories section.
Original Puch spare part number: 349.4.28.502.2, 349.7.28.503.2 and 349.4.28.603.2 (with adjustments)
Details
| Material | Plastic |
| Color | Chrome |
| Number of fixing points | 6 pcs |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 48 mm · Total length: 63 mm
EUR 17,30
Moped fans like you also bought:
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 425 mm · Width: 168 mm · Height: 32.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Hole spacing: 29 mm
EUR 23,00
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
EUR 40,30
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Total length: 360 mm · Thread type: M8x1.25 (standard thread) · Thread size: M8 · Clamping diameter: 22 mm
EUR 28,70
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 48 mm · Total length: 63 mm
EUR 17,30
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Outer width: 160 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 12.5 mm
EUR 17,20
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning
EUR 92,30
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Area of application: Tuning
EUR 40,30
Not in stock
GPO Chrome mudguard strut | Puch Maxi S, N
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 240 mm · Distance mudguard - center hole: 197 mm · Distance mudguard - center hole: 231 mm · Outer width: 25.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 8 pcs · Hole spacing: 34 mm · Hole spacing: 40 mm · Ø mounting hole: 6 mm · Wide intake: 53 mm
EUR 26,40
Collection only possible with online purchase and appointment.
