Classic rear-view mirror suitable for your moped, moped or small motorcycle.
The mirror glass frame and the mirror rod are made of steel, chrome-plated.
The mirror clamp is galvanized.
Can be used on the left or right as desired.
The rear-view mirror can be easily mounted on all handlebars with a diameter of 22 mm using the enclosed mounting clamp.
German quality product from the manufacturer Busch+Müller (Bumm).
Details
Clamping diameter | 22 mm |
Manufacturer | Bumm |
Material | Steel |
Surface | chrome-plated |
Color | Chrome |
Mirror surface length | 120 mm |
Wide mirror surface | 65 mm |
Ø mirror rod | 8 mm |
Mirror rod length | 300 mm |
Thread size | M8 |
Accessories & related products
Moped fans like you also bought:
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Height: 7 mm · Sachs spare part no.: P0521 · Puch spare part no.: 349.1.30.015.1
EUR 2,80
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
EUR 11,20
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Tire height [%]: 100 · Valve type: TR4 Auto valve
EUR 11,20
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Bearing cage: Brass cage ball-guided · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Area of application: Standard · Surface: blank · Width: 10 mm · Ø outside: 40 mm · Ø inside: 15 mm · Ball bearing closed: No · Pony spare part no.: A4502 · Sachs spare part no.: 0932 007 001
EUR 28,10
NSK 6201 ball bearing 12/32/10
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 12 mm · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Area of application: Standard · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 10 mm · Ø outside: 32 mm · Ball bearing closed: No
EUR 9,60
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Width: 5.5 mm · Ø outside: 30 mm · Place of use: Crankshaft · Ø inside: 15 mm · Pony spare part no.: A5602 · Sachs spare part no.: 0230 111 100
EUR 8,90