Fuel supply

swiing® revival membrane seal 0.4 mm | Sachs 50/2, 50/3, 50/4 (A1840)

Manufacturer: swiing® revival parts · Material: Oiled paper · Hole spacing inlet: 67 mm · Thickness: 0.4 mm · Pony spare part no.: A1840 · Sachs spare part no.: 0250 106 00

Diaphragm insert Sachs 50/2

Material: Brass · Number of flaps: 2 pcs · Membrane material: Spring steel · Ø mounting hole: 5.2 mm · Number of fixing points: 2 pcs · Hole spacing: 67 mm · Area of application: Standard · Mounting type: Screws · Pony spare part no.: A2624 · Sachs spare part no.: 0286 213 010

swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Ø inside: 17 mm · Total length: 29 mm · Width: 80 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: blue galvanized · Mounting type: Screws · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 31 mm · Hole spacing: 67 mm · Thickness: 6.9 mm · Number of fixing points: 4 pcs · Area of application: Tuning

Polini 2-folding diaphragm insert

Thickness: 2 mm · Manufacturer: Polini · Number of flaps: 2 pcs · Ø mounting hole: 5.3 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 39 x 36/32 mm · Area of application: Tuning · Mounting type: Screws

Polini lung aluminum

Total height: 40 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Tuning · Mounting type: Cable ties · Total length: 105 mm

Stage6 lung aluminum

Total height: 40 mm · Manufacturer: Stage6 · Material: Aluminum · Camouflaged: No · Surface: chrome-plated · Color: Chrome · Area of application: Tuning · Mounting type: Cable ties · Ø External connection: 6 mm · Ø inside: 4 mm · Total length: 105 mm · Total length: 125 mm

swiing® ingenious intermediate flange 13 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Area of application: Standard · Area of application: Tuning · Mounting type: Screws · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Ø inside: 13 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Number of fixing points: 4 pcs

Malossi diaphragm plate carbonite 0.3 mm

Manufacturer: Malossi · Area of application: Tuning · Total length: 100 mm · Membrane material: Carbonite · Width: 100 mm · Thick membrane platelets: 0.3 mm

Intermediate flange diaphragm 12 mm | Sachs 502, 50/2, 50/3, 50/4 (A2621)

Material: Aluminum · Area of application: Standard · Mounting type: Screws · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Ø inside: 12 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Number of fixing points: 4 pcs · Pony spare part no.: A2621 · Sachs spare part no.: 0286 210 001

Malossi reed valve carbon 0.3 mm

Manufacturer: Malossi · Total length: 100 mm · Membrane material: Carbon · Width: 100 mm · Area of application: Tuning · Thick membrane platelets: 0.3 mm

Malossi diaphragm plate carbonite 0.35 mm

Manufacturer: Malossi · Area of application: Tuning · Total length: 100 mm · Membrane material: Carbonite · Width: 100 mm · Thick membrane platelets: 0.35 mm

Malossi diaphragm plate carbonite 0.4 mm

Manufacturer: Malossi · Area of application: Tuning · Total length: 100 mm · Membrane material: Carbonite · Width: 100 mm · Thick membrane platelets: 0.4 mm

swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Area of application: Standard · Mounting type: Screws · Number of flaps: 2 pcs · Thread type: M5x0.8 (standard thread) · Ø inside: 12 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Number of fixing points: 4 pcs

Athena 2-folding diaphragm Puch / Sachs

Manufacturer: Athena · Area of application: Tuning · Mounting type: Screws · Number of flaps: 2 pcs · Membrane material: Spring steel · Number of fixing points: 4 pcs

Malossi diaphragm insert carbon 0.3 mm | Peugeot 103 / BYE BIKE

Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Surface: raw · Area of application: Tuning · Mounting type: Screws · Number of flaps: 1 pcs · Total length: 50 mm · Membrane material: Carbon · Width: 43 mm · Width: 47 mm · Thick membrane platelets: 0.3 mm · Hole pattern [mm]: 32 / 36 x 39 · Thickness: 3 mm · Ø mounting hole: 5.4 mm · Number of fixing points: 4 pcs

Stage6 reed valve block VForce 3 by Moto Tassinari

Manufacturer: Stage6 · Number of flaps: 8 pcs · Hole spacing: 52 mm

Polini Lunge plastic black

Total height: 45 mm · Manufacturer: Polini · Material: Plastic · Area of application: Tuning · Color: black · Mounting type: Cable ties · Thread type: MF10x1 (fine pitch thread) · Total length: 126 mm

Polini 4-flap diaphragm insert

Manufacturer: Polini · Camouflaged: No · Material: Plastic · Material: Sheet metal (steel) · Surface: raw · Area of application: Tuning · Mounting type: Stud bolts & nuts · Number of flaps: 4 pcs · Total length: 72.9 mm · Membrane material: Carbon · Width: 47.9 mm · Thick membrane platelets: 0.3 mm · Hole pattern [mm]: 35 x 60 · Number of fixing points: 4 pcs

Stage6 reed valve V-Force 3 by Moto Tassinari | Minarelli

Total length: 76 mm · Width: 68 mm · Manufacturer: Stage6 · Material: Plastic · Mounting type: Screws · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Ø mounting hole: 6.5 mm · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning

Malossi MHR diaphragm intake system PHGB

Manufacturer: Malossi · Material: Aluminum · Camouflaged: No · Material: Viton · Area of application: Tuning · Mounting type: Screws · Number of flaps: 2 pcs · Membrane material: Carbonite · Ø inside: 24.5 mm · Hole pattern [mm]: 60 x 35 / 61 x 40 · Ø mounting hole: 6.5 mm · Number of fixing points: 4 pcs

Diaphragm seal | Minarelli, Aprilia, Suzuki

Material: Sealing paper · Place of use: Admission · Ø screw holder: 6.3 mm · Thickness: 0.5 mm · Area of application: Racing · Area of application: Tuning