Lenkkopflagerung
Sort:Popularity
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Height: 7 mm · Sachs spare part no.: P0521 · Puch spare part no.: 349.1.30.015.1
EUR 2,80
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Area of application: Standard · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Height: 13.8 mm · Ø outside: 28.9 mm · Width across flats SW: 30 mm · Ø outside: 36.4 mm · Thread depth: 12 mm
EUR 11,20
GPO steerer tube nut M26x1 open stem chrome
Ø inside: 22.1 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Flange nut · Drive: External hexagon · Height: 14 mm · Ø outside: 36.5 mm · Width across flats SW: 30 mm · Thread depth: 11.5 mm · Thread type: MF26x1 (fine pitch thread)
EUR 14,50
Moderate Casual 
Fork steerer nut M26x1 closed small fork plate chrome
Manufacturer: Quenching · Material: Steel · Area of application: Standard · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Height: 16.3 mm · Ø outside: 28.6 mm · Width across flats SW: 30 mm · Thread depth: 8 mm
EUR 8,45
swiing® revival steerer tube nut M26x1 open Stem Inox
Ø inside: 22.15 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Nut type: Union nut · Drive: External hexagon · Height: 14 mm · Ø outside: 36.5 mm · Width across flats SW: 30 mm · Thread depth: 11 mm · Thread type: MF26x1 (fine pitch thread)
EUR 21,30
swiing® revival steerer tube nut M26x1 open Stem Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Nut type: Union nut · Drive: External hexagon · Height: 12 mm · Ø outside: 28.3 mm · Ø inside: 21.15 mm · Width across flats SW: 30 mm · Thread depth: 8 mm · Thread type: MF26x1 (fine pitch thread)
EUR 21,30
swiing® revival steerer tube nut 1"/24G closed Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Nut type: Hexagon nut · Drive: External hexagon · Height: 14 mm · Ø outside: 36.5 mm · Width across flats SW: 30 mm · Thread type: FG25.4 (1" 24G)
EUR 21,30
Hot 
66HEROES steerer tube nut M26x1 closed pointed fork plate chrome
Manufacturer: 66HEROES · Material: Steel · Surface: chrome-plated · Nut type: Pointed nut · Drive: External hexagon · Ø outside: 36.5 mm · Height: 53 mm · Width across flats SW: 30 mm · Thread depth: 11 mm · Thread type: MF26x1 (fine pitch thread)
EUR 23,60
swiing® revival steerer tube nut 1"/24G open Inox
Ø inside: 22.1 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Drive: External hexagon · Height: 14 mm · Ø outside: 36.5 mm · Width across flats SW: 30 mm · Thread depth: 12 mm · Thread type: FG25.4 (1" 24G)
EUR 21,30
Hot
66HEROES steerer tube nut 1" / 24G closed pointed fork plate chrome
Manufacturer: 66HEROES · Material: Steel · Surface: chrome-plated · Nut type: Pointed nut · Drive: External hexagon · Ø outside: 36.5 mm · Height: 53 mm · Width across flats SW: 30 mm · Thread depth: 11 mm · Thread type: FG25.4 (1" 24G)
EUR 23,60
Precise steering movements and more riding comfort with high-quality steering head bearings for your Puch moped
The quality and condition of the headset or steering head bearing on your Puch Maxi moped have a significant impact on riding safety and stability. A defective bearing can mean that you no longer have full control of your motorbike, especially when riding fast and cornering. The moped handlebars may then jerk as if you were sitting on a bucking horse. Of course, this is not a condition that you can ignore. In such a case, it is therefore essential that you replace the steering head bearing, as it is most likely worn out or damaged in some other way. You can obtain precisely fitting steering head bearings for your Puch-Maxi and for all other models of the traditional and glorious manufacturer from our neighbouring country from us, in a large selection and, as you would expect, at a fair price. You will discover high-quality bearings from our own brands swiing and GPO as well as rare NOS spare parts. You can look forward to short delivery times for your order, as we dispatch almost all parts directly from stock.
With professional special tools, you can make replacing the steering head bearing much easier!
In principle, it is not particularly difficult or time-consuming to fit a new steering head bearing to your Puch-Maxi moped. However, the old steering head bearings are sometimes very tight. To avoid damaging the tube in which they sit, you should not use brute force, such as a hammer, to remove them. It is better to use a press-out tool, which you can of course also order conveniently and at an attractive price in our shop. We also have the right tool for pressing in the new bearings. With a press-in aid like this, fitting your new steering head bearing to your Puch Maxi moped is almost child's play. Extra tip: The new bearings are even easier to install on your Puch moped if you put them in the freezer for a while beforehand. This causes the metal of the steering head bearings to contract, making them easier to fit. Also remember to treat the new bearings properly with grease after fitting.
Your new steering head bearing in proven brand quality
All bearings that we offer for your Puch moped guarantee above-average quality and workmanship. The precision-manufactured steering head bearings from our own brand swiing in particular fulfil the highest demands in terms of stability, durability and resilience. The parts from GPO, which allow you to repair your moped for little money, are also very interesting in terms of price. By the way, you can not only get new steering head bearings for your Puch moped from us, but of course also the matching steerer tube nuts in many different designs.
Order durable steering head bearings and precise steerer tube nuts for your Puch moped online now at mofakult
If you want to replace the steering head bearings on your motorbike and perhaps also replace the steerer nuts at the same time, perhaps with stylish parts with elegant tips, you've come to the right place. Whether you need steering head bearings for your Puch-Maxi moped or disc brakes for your X30, we offer you the right parts in brand quality and at a fair price. Of course, you will always receive expert advice on all questions relating to your order or a specific spare part. So don't hesitate to give us a call or drop us an e-mail if you have any questions.
Collection only possible with online purchase and appointment.
