Gebläse & Verschalung

Ignition cover Standard | Puch

Material: Steel · Surface: chrome-plated · Ø inside: 125 mm · Ø outside: 130 mm · Color: Chrome · Number of fixing points: 2 pcs · Height: 48 mm

Ignition cover "Puch" Black Edition

Material: Steel · Surface: varnished · Ø inside: 125 mm · Ø outside: 130 mm · Color: black · Number of fixing points: 2 pcs · Height: 48 mm · Alternative version of the Puch spare part no.: 349.3.10.034.2

Rubber cap ignition cover | Puch

Area of application: Standard · Material: Rubber · Ø mounting hole: 3 mm · Ø outside: 54 mm · Color: black · Total height: 9 mm · Material thickness: 3 mm · Height: 5 mm

swiing® revival screws set fan wheel Inox | EVO, HPI

Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Number of components: 6 pcs · Drive: Slot

swiing® revival emblem "Puch" ignition cover black

Manufacturer: swiing® revival parts · Material: Rubber · Shape: round · Color: black · Puch spare part no.: 349.1.10.036.1

GPO ignition cover chrome "Puch" emblem black | Puch

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Ø inside: 125 mm · Ø outside: 130 mm · Color: Chrome · Number of fixing points: 2 pcs · Height: 48 mm · Puch spare part no.: 349.3.10.034.2

swiing ignition cover "Puch" emblem chrome | Puch

Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø inside: 125 mm · Ø outside: 130 mm · Color: Chrome · Number of fixing points: 2 pcs · Height: 48 mm · Alternative version of the Puch spare part no.: 349.3.10.034.2

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Ø inside: 39 mm · Ø outside: 120 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Height: 13.5 mm · Number of fixing points: 10 pcs · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Weight: 87 g

Insulation board 2.3 mm for gluing 40 x 50 cm

Height: 2.3 mm · Width: 400 mm · Total length: 500 mm · Manufacturer: Made in France · Color: black

swiing® revival fan wheel | Puch Velux X30

Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Number of fixing points: 4 pcs · Puch spare part no.: 320.1.10.072.1

Ignition cover Puch (old emblem) chrome

Material: Steel · Surface: chrome-plated

Ignition cover cable starter chrome | Puch

Material: Steel · Surface: chrome-plated · Color: Chrome · Number of fixing points: 2 pcs · Number of fixing points: 3 pcs

swiing® revival neck nut M7 fan cover | Puch X30 Velux

Manufacturer: swiing® revival parts · Nut type: Neck nut · Thread type: M7x1 (standard thread) · Drive: External hexagon

Siggnature grille fan cowl aluminum | Puch X30 Velux

Ø outside: 84 mm · Manufacturer: Siggnature · Material: Aluminum · Height: 3 mm

GPO ignition cover chrome "Puch" emblem gray | Puch

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of fixing points: 2 pcs · Puch spare part no.: 349.3.10.034.2

swiing alternator cover aluminum low | Puch X30 NS, NL

Manufacturer: swiing · Material: Aluminum · Number of fixing points: 2 pcs

Pole wheel cover transparent | Puch E50, Z50, ZA50

Material: Polycarbonate (PC) · Color: transparent · Height: 48 mm · Ø inside: 124 mm · Ø outside: 126 mm · Number of fixing points: 2 pcs

swiing® revival emblem "Puch" ignition cover gray

Manufacturer: swiing® revival parts · Color: gray · Puch spare part no.: 349.1.10.036.1

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 39 mm · Weight: 87 g · Ø outside: 120 mm · Color: black · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Height: 13.5 mm

swiing® revival protective cap shift paddle black | Puch X30 Z50

Manufacturer: swiing® revival parts · Material: Plastic · Color: black

Blower cover aluminum silver | Puch MS, VS, DS, MV, VZ (CH)

Ø outside: 168 mm · Material: Aluminum · Number of fixing points: 2 pcs

Support screw M6 x 90/35 mm | Puch DS50, VZ50, VS50, MV50, X30, X40, X50

Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 90 mm · Screw head: Hexagon · Thread length: 35 mm · Width across flats SW: 10 mm

Fan wheel ZA50 NOS | Puch X30 NG-2AH

Manufacturer: Puch · Material: Plastic · Number of fixing points: 4 pcs

Cast aluminum blower cover | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Surface: polished · Color: silver · Number of fixing points: 2 pcs

Blank aluminum fan wheel Bosch / Ducati | Puch MS, VS, DS, MV, VZ

Ø inside: 90 mm · Ø outside: 163 mm · Material: Aluminum · Surface: raw · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Ø bolt circle: 102 mm

Flywheel cover aluminum with logo | Puch Monza

Material: Aluminum · Surface: polished · Color: silver · Number of fixing points: 3 pcs

Siggnature repair tab fan cover Z50 | Puch X30 Velux

Height: 3 mm · Height: 5.5 mm · Width: 18 mm · Total length: 38.5 mm · Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Color: graphite colors · Hole pattern [mm]: 11.2

Snap ring blower cover Puch DS50, VZ50, VS50, MV50

Material: Spring steel · Puch spare part no.: 350.1.10.074.1

Blower cover blank aluminum | Puch MS, VS, DS, MV, VZ

Ø outside: 168 mm · Material: Aluminum · Color: silver · Number of fixing points: 2 pcs

Blower cover inside blank aluminum | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Color: gray

Aluminum engine cover with pedal shaft | Puch MV50

Material: Aluminum · Color: silver · Number of fixing points: 3 pcs

Flywheel cover aluminum | Puch DS50, VZ50V, VZ50M, VS50, MV50

Ø inside: 118 mm · Ø outside: 125 mm · Material: Aluminum

Exterior blower cover blank aluminum | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Surface: polished

Clutch cover "Triple-Clutch" | Puch E50

Height: 38.5 mm · Total length: 116 mm · Width: 116 mm · Manufacturer: Made in Switzerland · Ø inside: 30 mm · Ø inside: 107 mm · Ø outside: 116 mm · Material: Aluminum · Surface: anodized · Color: black · Number of fixing points: 4 pcs

Blower cover NOS | Puch X30 NG-2AH

Manufacturer: Puch · Material: Aluminum · Color: silver

Base plate fan cooling Occ. | Puch X30 NG-2AH

Manufacturer: Puch · Material: Aluminum

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Puch X30 Velux, Sachs 503, Belmondo

Ø inside: 39 mm · Ø outside: 120 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Color: Chrome · Surface: chrome-plated · Height: 13.5 mm · Number of fixing points: 10 pcs · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Weight: 87 g

Base plate blower cover ZA50 NOS | Puch X30 NG-2 AH

Ø inside: 124 mm · Ø outside: 175 mm · Manufacturer: Puch · Material: Cast aluminum · Surface: raw · Color: silver · Width: 180 mm · Height: 63 mm · Total length: 255 mm · Number of fixing points: 4 pcs

Support bolt pinion cover | Puch DS50, VZ50, VS50, MV50, X30, X40, X50

Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 51 mm · Screw head: Hexagon

Siggnature drilling jig for repair tab fan cover Z50 | Puch X30 Velux

Height: 2 mm · Width: 18.6 mm · Total length: 44 mm · Manufacturer: Siggnature · Material: Steel · Hole pattern [mm]: 11.2