Auspufftopf
Sort:Popularity
swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust)
Total length: 730 mm · Manufacturer: swiing® ingenious parts · Ø outside: 70 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar
EUR 112,60
EUR 123,90
Exhaust 22 mm original 2-piece | Puch Maxi S, N
Manufacturer: Puch · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Flange · Ø Flame tube outside: 22 mm · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 6 pcs
EUR 174,60
GPO exhaust flute Ø 28 / 60 mm original | Sachs 50/2, 503
Total length: 560 mm · Manufacturer: GPO · Ø outside: 20 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
EUR 112,60
- 9 %
Hot 
swiing cigar Ø 32 / 70 mm chrome (reso exhaust)
Total length: 730 mm · Manufacturer: swiing · Ø outside: 70 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 32 mm · Ø Silencer: 70 mm · Exhaust type: Cigar
EUR 112,60
EUR 123,90
GPO exhaust clamp 55 mm chrome (version 2.0) | Puch X30 Velux
Manufacturer: GPO · Thickness: 2 mm · Material: Steel · Width: 15 mm · Surface: chrome-plated · Nominal diameter: 55 mm · Ø outside: 57 mm · Ø outside: 59 mm · Clamping diameter: 53 - 55 mm · Color: Chrome · Ø mounting hole: 7 mm · Ø mounting hole: 9.1 mm · Number of fixing points: 1 pcs
EUR 26,90
Exhaust Boss Demper Ø 28 / 60 mm chrome
Ø outside: 60 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Total length: 580 mm · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Exhaust type: Dragpipe / sharp end · Flame tube attachment: Plug connection clamped
EUR 112,60
Hot
swiing flute Ø 32 / 70 mm chrome (reso exhaust)
Ø outside: 25 mm · Manufacturer: swiing · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Total length: 785 mm · Ø Internal connection: 32 mm · Ø Silencer: 70 mm · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
EUR 131,20
swiing® ingenious cigar Ø 28 / 70 mm chrome (reso exhaust) camouflaged | Puch Maxi S, N
Total length: 730 mm · Manufacturer: swiing® ingenious parts · Ø outside: 70 mm · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Exhaust type: Cigar
EUR 157,70
Exhaust Boss Demper Ø 28 / 60 mm with lug chrome | Puch
Total length: 580 mm · Material: Steel · Surface: chrome-plated · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Ø outside: 60 mm · Color: Chrome · Exhaust type: Dragpipe / sharp end · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped · Number of fixing points: 1 pcs
EUR 112,60
Jamarcol muffler flute Ø 32 / 70 mm chrome
Ø outside: 70 mm · Manufacturer: Jamarcol · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Total length: 790 mm · Ø Internal connection: 32 mm · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
EUR 95,70
Rear muffler flute Ø 28 / 70 mm chrome
Ø outside: 70 mm · Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Screwed clamp · Total length: 700 mm · Ø Internal connection: 28 mm · Exhaust type: Flute · Flame tube attachment: Plug connection clamped
EUR 66,40
swiing® ingenious silencer counter-cone set | Puch
Total length: 210 mm · Manufacturer: swiing® ingenious parts · Ø inside: 14.3 mm · Ø outside: 54.5 mm · Material: Aluminum · Surface: anodized · Color: graphite colors · Surface: raw · Color: red · Alternative version of the Puch spare part no.: 349.1.16.011.0
EUR 101,30
Not in stock
Page 1 of 3
Your new exhaust silencer for your Puch-Maxi, Velux X30 or NG-2AH moped
The exhaust silencer on your moped not only serves to reduce the noise emissions of your Puch Maxi, Sport X30 or X30 NG-2AH moped to a level that is tolerable for others. In addition, it is responsible for optimally dissipating the exhaust gases from the combustion of the fuel-air mixture. In this way, it contributes to maximum power output. Of course, this is especially the case if you opt for a tuning exhaust system including silencer. With us, you will not only find original silencers as spare parts for your Puch Maxi or Velux moped. We also have a wide selection of exhaust tuning parts and flame pipes for Austrian mopeds from renowned manufacturers such as Tecno, Homoet or Proma, always including a matching exhaust clamp, of course.
Replacing the silencer on your Puch moped
As the entire exhaust is attached with just a few screws, it is not difficult for beginners to replace it if necessary. This may be necessary, for example, if the original silencer is corroded due to its age and rust has already eaten holes in it. However, a suitable exhaust is also essential for a harmonious tuning setup on your moped. Because you can only get the maximum performance out of your Hödi if all the tuning parts are perfectly matched. However, this is generally not possible with an original exhaust.
From the original silencer to high-performance tuning exhausts
For your moped, such as the beautiful Puch X30 or the legendary Puch Maxi moped, we offer you original silencers and always the right tuning silencer from well-known brands such as GPO, Jamarcol, MLM and 66Heroes. Of course, you can also buy a silencer from our own brand swiing, including a matching exhaust clamp. Every exhaust silencer available from us for Puch mopeds such as the Puch-Maxi-Töffli, the Monza-Hobel or the X30-Perle is optimally matched to the respective model, so that an excellent fit is guaranteed. This makes installation simple and easy. The same applies to every exhaust clamp that you order from us to match your new silencer. This means you can easily replace the entire exhaust system on your moped.
Order your high-quality exhaust silencer for all Puch models online at mofakult now
Is your Puch maxi pearl getting on in years and needs a new exhaust system? Whether you opt for an original muffler for your maxi moped or would prefer to install a tuning muffler on your X-30 slicer for more power, you'll find what you're looking for here. In our online shop, you can get first-class branded goods including matching exhaust clamps at a fair price, allowing you to repair or upgrade the performance of your moped for little money. From exhaust silencers for Puch models to many other tuning parts for your moped, almost all the products we offer are available directly from stock. We are happy to support you if you have any questions about a specific part or need advice. Simply send us an e-mail or give us a call.
Collection only possible with online purchase and appointment.
