Complete brake anchor plate from the manufacturer Grimeca, including brake pads, suitable for the front brake of Peugeot 103 SP and MVL rims.
With a little skill, the brake plate can also be adapted for Puch bikes. To do this, the collar of the anchor plate and the mounting of the locking cam of the fork must be milled off a little.
Ø outside brake shoes: 90 mm
Width brake shoes: 20 mm
Ø Bore for wheel axle: 12.2 mm
Ø outer brake plate: 110 mm
Height collar (from outer side of plate): 10 mm
Height mounting locking cam: 10 mm
Further accessories such as brake shoes or other brake anchor plates can be found in the accessories section.
Details
| Material | Aluminum |
| Surface | sandblasted |
| Ø outside | 110 mm |
| Ø External brake pads | 90 mm |
| Ø axle | 12 mm |
| Ø bore | 12.2 mm |
Suitable for the following models
| Puch | |
| Peugeot |
Accessories & related products
Magura cable clamp Ø 8 x 15 mm
Ø outside: 8 mm · Total length: 15 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard
EUR 2,90
swiing® ingenious wheel axle with bearing conversion kit spoke hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats SW: 19 mm · Ball bearing closed: Yes
EUR 44,90
Moped fans like you also bought:
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
EUR 11,40
Side stand black | Puch Maxi S, N, P1 / Supermaxi LG1, LG2 / X30 NS, NL, NG, N-2AH
Manufacturer: Made in Portugal · Material: Steel · Surface: powder-coated · Color: black · Total length: 340 mm · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs · Adjustable: Yes
EUR 23,00
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Total length: 8 mm · Drive: Slot
EUR 24,10
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2,75
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24
Color: black · Total length: 46 mm · Width: 60 mm · Height: 96 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SHA (Piaggio) · Nominal diameter: 13 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66 · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 69,20
Not in stock
Collection only possible with online purchase and appointment.
