H.905 brake caliper for various front and rear wheels on Sachs and Hercules mopeds, mopeds with automatic engines.
The workmanship is good and the brake plate fulfills its purpose without any problems. Only a little copper grease on the brake cam and a slightly thicker washer to reduce the play would be beneficial.
Suitable add-on parts such as brake pads, the aforementioned grease and a suitable adjusting screw can be found in the accessories section.
Details
Material | Steel |
Surface | blue galvanized |
Ø drum | 90 mm |
Ø outside | 107 mm |
Ø axle | 10 mm |
Ø bore | 12.2 mm |
Wide cam holder | 10 mm |
Brake lever length (lever length) | 65 mm |
Cranking (offset) | 15 mm |
Suitable for the following models
Sachs | |
Hercules |
Accessories & related products
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: blue galvanized · Nipple shape: Pears · Area of application: Standard · Cable length: 2200 mm
EUR 2,70
Eurol copper grease 100 g
Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Temperature resistance (min.): -40 - 1100 °C · Contents [g]: 100 g · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
EUR 13,40
EUR 134,00/kg
Magura set screw M6x34 mm lock nut SW10
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Thread length: 23 mm · Ø Receptacle: 7.05 mm · Width across flats nut: 10 mm
EUR 2,80
Stop nut M6 Inox
Material: Chrome steel (stainless steel) · Nut type: Self-securing nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 0,80
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Area of application: Standard · Width across flats SW: 7 mm · Thread length: 7 mm · Total length: 15 mm
EUR 2,80
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: blue galvanized · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 11,20
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: blue galvanized · Nipple shape: Pears · Area of application: Standard · Cable length: 2200 mm
EUR 2,70
Magura set screw M6x34 mm lock nut SW10
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Thread length: 23 mm · Ø Receptacle: 7.05 mm · Width across flats nut: 10 mm
EUR 2,80