Needle clip in the throttle slide to hold the throttle needle in Bing SRE carburetors on your moped, moped or small motorcycle.
This clamping spring was installed on original Sachs 503 Bing SRE, Puch Maxi, Condor and Zündapp Belmondo.
Ø outer: 13.3 mm
Ø inner
Material thickness: 0.8 mm
Original Puch spare part number: 362.1.15.013.1
Original Pony spare part number: A4523
Original BING spare part manufactured in Germany in original equipment quality.
NOS – New from old stock.
Details
| Manufacturer | BING |
| Material | Steel |
| Thickness | 0.8 mm |
| Puch OEM number | 362.1.15.013.1 |
| Pony OEM number | A4523 |
| Sachs OEM number | 0961 118 000 |
Suitable for the following models
| Universal | |
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 535 |
| Zündapp Belmondo |
Accessories & related products
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Nominal diameter: 15 mm · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 93,70
17 mm carburetor set (Bing SRF replica) | Zündapp Belmondo
Carburetor type: SRF · Nominal diameter: 16 mm · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17 mm · Ø Air filter connection: 60 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 40 mm · Area of application: Tuning
EUR 128,80
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Total length: 66 mm · Carburetor type: SRE · Width: 50 mm · Nominal diameter: 15 mm · Height: 95 mm · Camouflaged: Yes · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 93,70
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Total length: 12 mm · Width: 3.3 mm · Material: Aluminum · Material: Rubber · Surface: blank · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 2.6 mm · Ø outside: 4 mm · Carburetor type: 18 Catalyst · Carburetor type: 85 · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 8,10
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
EUR 3,30
BING nozzle needle Bing SRE, 85 & 17 / 18 (four grooves)
Manufacturer: BING · Carburetor type: SRE · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 1.9 mm · Total length: 36 mm · Number of grooves (needle designation): 4 pcs · Number of notches (needle clip): 4 pcs
EUR 10,40
Collection only possible with online purchase and appointment.
