Racing cylinder of the Athena brand for Sachs 504 (with adaptations), 505 & 508 engines, which were installed on Hercules mopeds / mopeds, among others.
Thanks to the large intake, overflow and exhaust, this tuning cylinder provides a significant increase in performance.
The intake manifold and exhaust flange are included in the scope of delivery.
Plugs with a long thread must be used.
Technical data cylinder:
- Ø inside intake manifold: 15 mm
- Connection diameter intake manifold: 20 mm
- Ø inside exhaust flange: 20 mm
- Ø connection exhaust flange: 25.7 mm
- Distance stud bolt exhaust flange: 50 mm
- Ø thread exhaust flange: M8
- Ø cylinder neck: 51.6 mm
- stroke: 44 mm
- bore: 45.0 mm
- Thread for decompressor: M10 x 1.5 mm
Attention: For Swiss 504 engines (42 mm stroke), the following modifications must be made to the cylinder:
- Adjust cylinder base and gasket as shown in Figure 5.
- The cylinder base must be turned off so that the compression is adjusted again due to the shorter stroke, we recommend setting a crushing edge of 0.8 - 1.0 mm.
- In the model with an external clutch lever, the intake must be extended, otherwise the carburettor may come into contact with the clutch lever.
Quality product from the Italian manufacturer Athena.
Details
| Manufacturer | Athena |
| Material | Aluminum |
| Area of application | Tuning |
| Surface | sandblasted |
| Crankshaft stroke | 44 mm |
| Ø piston pin (B) | 12 mm |
| Nominal diameter | 45 mm |
| Ø cylinder neck | 51.7 mm |
| Ø Outlet outside | 25.9 mm |
| Camouflaged | No |
| Ø Inlet inside | 14.3 mm |
| Inlet window | 23.4 x 12.6 |
| Hole pattern [mm] | 56 (61) x 56 |
| Ø outlet inside | 19.5 mm |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole spacing outlet | 50 mm |
| Decompressor | M10x1.5 |
| Outlet type | straight, clamped |
| Thread outlet | M8x1.25 (standard thread) |
| Hole spacing inlet | 31.5 mm |
Suitable for the following models
| Sachs | 505 (mit Tretwelle) - 1A (AT), 2 A (HG), 2B (HG) 508 - 1 A |
| Hercules | Prima - 2, 3, 4, 5, Optima |
Accessories & related products
NGK B8ES spark plug long thread
Width across flats SW: 21 mm · Manufacturer: NGK · Candle designation: B8ES · Candle thread type: long · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Spark plug socket: M4 · Suppressed: No · Spark plug socket: SAE · Thread type: MF14x1.25 (fine pitch thread)
EUR 7,60
Athena piston 45 mm #A | Sachs 504 / 505
Manufacturer: Athena · Ø outside piston (A): 44.92 mm · Ø piston pin (B): 12 mm · Compression height (C): 28.2 mm · Total piston height (E): 45.2 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 45 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 98 g
EUR 81,90
NGK BR8EIX spark plug long thread interference-suppressed Iridium
Width across flats SW: 21 mm · Manufacturer: NGK · Candle designation: BR8EIX · Candle thread type: long · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: Yes · Electrode material: Iridium · Thread type: MF14x1.25 (fine pitch thread)
EUR 31,50
swiing ingenious exhaust adapter 24 mm Athena cylinder| Sachs 504, 505, 508
Ø inside: 20 mm · Ø outside: 24 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Hole spacing: 50 mm · Ø mounting hole: 8.3 mm · Total length: 67 mm · Width: 43 mm · Height: 25.5 mm
EUR 29,20
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11,60
EUR 25,78/l
Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)
Simmering type: A - With rubberized outer part / one sealing lip. · Ø inside: 15 mm · Ø outside: 30 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Width: 5.5 mm · Pony OEM number: A5602 · Sachs OEM number: 0230 111 100
EUR 9,25
Oil seal NBR 15/35/7 AS crankshaft | Sachs 504, 535 (A4214)
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 35 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Width: 7 mm
EUR 10,40
Bing 85/12/101 carburetor (replica) | Sachs 504, 535
Material: Aluminum · Area of application: Standard · Nominal diameter: 12 mm · Carburetor type: 85 · Camouflaged: No · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Air filter connection thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle thread: M4x0.7 (standard thread) · Total length: 48 mm · Width: 50 mm · Nozzle size: 52 · Height: 100 mm
EUR 99,50
NTN 6202 Ball bearing 15/35/11
Ø inside: 15 mm · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 35 mm · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Bearing type: Deep groove ball bearing · Surface: blank · Ball bearing closed: No · Width: 11 mm
EUR 8,10
Collection only possible with online purchase and appointment.
