Professional Addy E50 4-bearing racing engine case, spindled to ” 52 mm for your Puch moped / moped.
Thanks to the gouging, it is possible to fit large 47 mm cylinder kits such as those from Gilardoni Italkit, Airsal or Parmakit. The slightly larger cylinder mounting surface ensures that tuning cylinders still have sufficient sealing surface available.
The housing was specially designed and manufactured for the tuning sector, which is why some components such as the flat surface for mounting a kick starter have been omitted.
The case has the following special features:
- Enlarged sealing surfaces in the area of the cylinder base
- slightly outwardly offset housing screws, leaving more space for larger overflow ducts
- prepared milling surfaces for GME inlet systems
- Fitting pins for secure positioning when assembling the housings
- Additional threads for a more flexible edge assembly
- Extra-large cooling fins in the lower area for better temperature dissipation and thus reduced wear on the crankshaft bearings
- Pin holder, 3 pcs. M6 thread at the original spacing
- Approved in all SAM moped racing and moped cross categories
- Perforation pattern for cylinder studs: 44 x 44 mm
Installation tips:
- Using the shims supplied, various gearboxes with different positions, such as those of the 3-bearing or MBR gearboxes, can be cleanly spaced out. Before reassembly, make sure that the gear wheel is properly centered.
Details
| Manufacturer | ADDY |
| Material | Aluminum |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit with cylinder head | Puch
Manufacturer: Parmakit · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Nominal diameter: 47 mm · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 27.5 mm · Inlet window: 30 x 18 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 46 mm · Outlet type: slanted · Hole spacing outlet: 46 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 468,80
Parmakit 47 mm cylinder kit without head | Puch
Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 49.5 mm · Nominal diameter: 47 mm · Ø piston pin (B): 12 mm · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Ø outlet inside: 28 mm · Hole spacing outlet: 45 mm · Outlet type: slanted · Hole spacing inlet: 46 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 362,10
Airsal 47 mm cylinder kit angled exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 199,20
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Nominal diameter: 43 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 246,10
Moped fans like you also bought:
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M8x1.25 (standard thread) · Screw head: Hexagon · Thread length: 12 mm · Total length: 18 mm · Drive: External hexagon · Drive: Slot · Puch OEM number: 901.1053
EUR 4,10
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11,60
EUR 25,78/l
swiing® ingenious intake manifold Gilardoni italkit Inox
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Ø inside: 21 mm · Mounting type: Screws · Total length: 80 mm · Ø External connection: 24 mm · Area of application: Tuning · Total height: 55 mm · Height flange center hole: 42.5 mm · Hole pattern [mm]: 60 x 35 · Number of fixing points: 4 pcs
EUR 79,60
DMP 45 mm cylinder kit incl. diaphragm | Puch
Manufacturer: DMP · Material: Aluminum · Camouflaged: No · Nominal diameter: 45 mm · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Surface: sandblasted · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Thread outlet: M6x1 (standard thread)
EUR 187,40
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Area of application: Tuning · Material: Steel · Recording type: Interlocking · Toothing type: straight toothed · Number of teeth: 18 pcs · Ø inside: 15 mm · Ø inside: 17 mm · Ø Receptacle: 31 mm · Ø outside: 99.5 mm · Height: 49 mm
EUR 216,70
Collection only possible with online purchase and appointment.
