Vintage grip set made of black rubber for your moped, moped and small motorcycle with automatic transmission.
Thanks to their shape and appealing design, these handlebar grips adapt perfectly to your hands and provide a pleasant riding experience. These grips give your retro and classic bike the finishing touch.
One set consists of one grip cover each with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, this item must be ordered twice. The handle ends are closed except for a small hole, but can be opened individually if required (e.g. for mounting a side mirror).
Total length: 123 mm
Ø outside (operating surface): 33 mm
Ø brim: 50 mm
For easier assembly, the grip rubbers can be placed in warm water or sprayed on the inside with GPO Grip Spray. If you dare, you can also use mummy's hairspray.
Mounting material for the grip covers, as well as other rubber grips and complete grip sets can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
Details
Manufacturer | 66HEROES |
Total length | 123 mm |
Material | Rubber |
Surface | raw |
Color | black |
Ø inside | 22 mm, 24 mm |
Ø outside | 33 mm, 50 mm |
Accessories & related products
Lusito handle set automatic aluminum black (short gas)
Manufacturer: Lusito · Total length: 130 mm · Total length: 150 mm · Housing material: Aluminum · Material: Rubber · Surface: powder-coated · Material lever: Aluminum · Number of components: 6 pcs · Ø inside: 22 mm · Ø inside: 24 mm · Color: black · Color: orange · Color: silver
EUR 56,20
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
EUR 9,85
Magura set screw M6x34 mm lock nut SW8
Width across flats Screw: 8 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø cable holder: 3.05 mm · Total length: 34 mm · Thread type: M6x1 (standard thread) · Slotted: No · Ø Receptacle: 7.05 mm · Width across flats nut: 8 mm · Thread length: 24 mm
EUR 2,80
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 2200 mm
EUR 2,70
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Total length: 6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Screw head: Lens head · Ø outside: 5 mm
EUR 2,25
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 2200 mm · Material: Steel · Quantity: 4 pcs
EUR 11,20
swiing® revival wiring harness MERIT light switch (version 2.0)
Cable cross-section [mm²]: 1.5 mm² · Manufacturer: swiing® revival parts · Area of application: Standard · Ø Receptacle: 22 mm · Number of cables: 5 pcs · Cable bifurcation to motor: 950 mm · Switch included: Yes · Luster terminal: Yes · Cable bifurcation to lamp: 230 mm · Cable bifurcation to switch: 400 mm · Tail light cable length: 1000 mm
EUR 45,00